merckx Posted April 20, 2007 Share Posted April 20, 2007 I need to undo the hub nuts on my van, the tightening torque is 360 ftlb. Does anyone know where I can get a breaker bar from tommorrow, I would prefer a 3/4" drive? I'm not sure if a 1/2" one would be up to the job. Do Halfords just sell the 1/2" one? Thanks Quote Link to comment Share on other sites More sharing options...
Rob Posted April 20, 2007 Share Posted April 20, 2007 My 1/2" bar was fine to undo the supra crank pulley nut, with an #ahem# over sleeve. Machine mart do them, they also do a 3/4" drive set, but without a breaker bar. Quote Link to comment Share on other sites More sharing options...
merckx Posted April 20, 2007 Author Share Posted April 20, 2007 Machine mart do them, they also do a 3/4" drive set, but without a breaker bar. Looks like they only go upto 46mm. Quote Link to comment Share on other sites More sharing options...
s3upra Posted April 20, 2007 Share Posted April 20, 2007 Try a local Bolt and Tool place if you have one-some are open saturday-usually have better quality stuff. Quote Link to comment Share on other sites More sharing options...
MONKEYmark Posted April 20, 2007 Share Posted April 20, 2007 car boot in leeds sells heavy duty super large size socket sets.my halfords socket set only go up to 32mm socket and that was too small for the nissan primera wheel hub nut. Quote Link to comment Share on other sites More sharing options...
merckx Posted April 20, 2007 Author Share Posted April 20, 2007 I think I'll have to have a drive around and see what I can find , some of the local places are expensive. I wished I had ordered one at the start of the week. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.