4packet Posted April 10, 2007 Share Posted April 10, 2007 Hi guys, have been experiencing intermittent (10% of the time)lack of boost from #2 turbo (#1 manages 0.65bar but no improvement across the rev range). After believing it to be a control pressure leak I have now finally measured a dodgy resistance across the VSV for the Intake Air Control Valve. This was after removing it and confirming its operation/resistance on the bench months ago!! Last weekend I repeatedly saw less than an Ohm across it. I ran the turbos in parallel on the weekend and all was fine - except for the noise and lag! Has anyone got a VSV for the IACV in good working order going spare? Many thanks in advance! Martin Link to comment Share on other sites More sharing options...
G9RGE Posted April 18, 2007 Share Posted April 18, 2007 I have one, but im not sure where its from, its part no is 90910-12114:) Link to comment Share on other sites More sharing options...
4packet Posted April 20, 2007 Author Share Posted April 20, 2007 Hi, Thanks for your reply. Unfortunately it is PN 90910-12126-B that I am after (typical!). Thanks again Martin Link to comment Share on other sites More sharing options...
Recommended Posts