Scooter Posted August 11, 2004 Share Posted August 11, 2004 How much would a leather / Alcantara (?) and log'd rear hatch cover thing be? the picture in this thread is typical of most covers i've had and seen and i think there might be quite a bit of interest in a custom material replacement. must be quite simple (cheap:D ) to do i'd imagine?......... Link to comment Share on other sites More sharing options...
millhouse Posted August 11, 2004 Share Posted August 11, 2004 I dont know, i didnt get one with my car Can you tell me how big it is Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted August 11, 2004 Share Posted August 11, 2004 Originally posted by millhouse Can you tell me how big it is I hope you are refering to the parcel shelf! Ben.. Link to comment Share on other sites More sharing options...
millhouse Posted August 11, 2004 Share Posted August 11, 2004 Originally posted by Soonto"HAS"soop I hope you are refering to the parcel shelf! Ben.. Yes i already know how big his is Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted August 11, 2004 Share Posted August 11, 2004 Originally posted by millhouse Yes i already know how big his is I won't ask how!?!? I may be interested in someething like this also if it is a good looking product, can't be too expensive. Too bits of leather, one with a logo cut out and the other sewn underneath. Ben.. Link to comment Share on other sites More sharing options...
millhouse Posted August 11, 2004 Share Posted August 11, 2004 I need some pictures and a size then i can ask vince for a price Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted August 11, 2004 Share Posted August 11, 2004 I'm just off out, but I'm sure that someone can check, someone could also check my spelling, it sucks tonight, but then that's Stella for you.... Ben.. Link to comment Share on other sites More sharing options...
Scooter Posted August 11, 2004 Author Share Posted August 11, 2004 kev it's 112cm wide and 47.5cm deep. The 'deep' measurement is just as is, it will need more material as there is a looping over at each end for the two rods that are part of the parcel shelf piece. Link to comment Share on other sites More sharing options...
Sharpie Posted August 11, 2004 Share Posted August 11, 2004 some pics... The item in question Link to comment Share on other sites More sharing options...
Sharpie Posted August 11, 2004 Share Posted August 11, 2004 wide Link to comment Share on other sites More sharing options...
Sharpie Posted August 11, 2004 Share Posted August 11, 2004 Hmmmm, that does not help. Let's try this one then. Looks like I have 1127mm wide Link to comment Share on other sites More sharing options...
Sharpie Posted August 11, 2004 Share Posted August 11, 2004 and the height Link to comment Share on other sites More sharing options...
Sharpie Posted August 11, 2004 Share Posted August 11, 2004 493mm from top to bottom, if you count the pole bit too. You can also see that the cover has a rivet to hold the top bracket onto the top part. Link to comment Share on other sites More sharing options...
Scooter Posted August 11, 2004 Author Share Posted August 11, 2004 Originally posted by Peter Sharp Looks like I have 1127mm wide that would be the larger / Heavier UK spec parcel shelf then Link to comment Share on other sites More sharing options...
Sharpie Posted August 11, 2004 Share Posted August 11, 2004 And a rivet at the bottom to hold the cloth onto the pole Link to comment Share on other sites More sharing options...
Sharpie Posted August 11, 2004 Share Posted August 11, 2004 and just to finish the collection of pic's.....the bracket the pole fits into. Scott Link to comment Share on other sites More sharing options...
lovatt Posted August 11, 2004 Share Posted August 11, 2004 Originally posted by Scooter How much would a leather / Alcantara (?) and log'd rear hatch cover thing be? the picture in this thread is typical of most covers i've had and seen and i think there might be quite a bit of interest in a custom material replacement. must be quite simple (cheap:D ) to do i'd imagine?......... i hope your not taking the piss out of MY hatch cover Link to comment Share on other sites More sharing options...
Sharpie Posted August 11, 2004 Share Posted August 11, 2004 Any discount for the R&D I put in Link to comment Share on other sites More sharing options...
Scooter Posted August 11, 2004 Author Share Posted August 11, 2004 Originally posted by lovatt i hope your not taking the piss out of my hatch cover moi? i reckon a Gibson and thingie one would look good though, don't you? If you had the material doubled over then you could even possibly have a logo on the underside as well, for those boot up look at my ICE posers amongst us (now i am taking the p*ss:D ) Link to comment Share on other sites More sharing options...
millhouse Posted August 11, 2004 Share Posted August 11, 2004 Originally posted by Peter Sharp Any discount for the R&D I put in Maybe Thanks for the pics Link to comment Share on other sites More sharing options...
millhouse Posted August 11, 2004 Share Posted August 11, 2004 Is it just 2 poles then with a bit of material between them I thought it was like a roller blind, the material gets rolled up inside one of the poles when you disconnect it Link to comment Share on other sites More sharing options...
lovatt Posted August 11, 2004 Share Posted August 11, 2004 me a poser dont be silly scooter no rolling involved, all it would take is two flat peices of leather attached to the original poles Link to comment Share on other sites More sharing options...
Sharpie Posted August 11, 2004 Share Posted August 11, 2004 and you would have to find a way to re-attach the hooks at the top. But, if they have a rivet type machine then it's not a problem OR add some new style hooks. The cover is extended all the time, even when the boot is shut, it's just the cord inside the boot plastic liner (underside of hatch) that extend when the boot hatch rises. Link to comment Share on other sites More sharing options...
millhouse Posted August 11, 2004 Share Posted August 11, 2004 Thats easy then, i will find out a price Link to comment Share on other sites More sharing options...
millhouse Posted August 11, 2004 Share Posted August 11, 2004 I have just spoken to vince, He said about £50 to £70, depending on what material is used and how long it takes It would be best to make one first to see whats involved It would be better made from alcantara because it comes in 1M wide rolls and not cow shaped Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now