Inferno Posted March 24, 2007 Share Posted March 24, 2007 Hi folks, I was wondering what options I have to monitor A/F ratios in the Supra? I am running an E-Manage Ultimate and it has an A/F IN option, but I would imagine you need some other device that actually feeds this into the EMU. Does anyone have any recommendations on this? Also, what is involved in setting up a device to rear/monitor this data? (is it as simple as tapping into ECU wires or.... ?) Thanks! Quote Link to comment Share on other sites More sharing options...
terribleturner Posted March 24, 2007 Share Posted March 24, 2007 I would think about an AEM UEGO - http://www.aempower.com/ViewCategory.aspx?CategoryID=67 A lovely bit of kit. The Sensor goes in your downpipe. Alot of people on here use it and i don't think you'll find any complaints. Quote Link to comment Share on other sites More sharing options...
Inferno Posted March 24, 2007 Author Share Posted March 24, 2007 Sounds great - these work no problems in a Japspec Supra? What is involved in installing one? Thanks again :-) Quote Link to comment Share on other sites More sharing options...
Sheefa Posted March 24, 2007 Share Posted March 24, 2007 I would think about an AEM UEGO - http://www.aempower.com/ViewCategory.aspx?CategoryID=67 A lovely bit of kit. The Sensor goes in your downpipe. Alot of people on here use it and i don't think you'll find any complaints. As James said mate, probably the best gadget around for AFR monitoring. I have one fitted to my J-spec TT, but Phoenix Motorsport did mine for around £250 including fitting. I'm sure you could do it yourself, but no ideas how I'm afraid. Quote Link to comment Share on other sites More sharing options...
SimonB Posted March 24, 2007 Share Posted March 24, 2007 The Innovate is a better bet IMHO. More flexible, and mine has been more reliable than the AEM I had before. Quote Link to comment Share on other sites More sharing options...
terribleturner Posted March 24, 2007 Share Posted March 24, 2007 Oh yeah the Innovate wideband too - http://www.innovatemotorsports.com/products/xd16.php Very easy, only problem would be the sensor mounting. Your down pipe may have a adaptor already welded on. But i know the AEM one comes with a bung incase you need it. Hole gets cut in the right place, bung welded on and then you can screw the sensor in. Quote Link to comment Share on other sites More sharing options...
Inferno Posted March 25, 2007 Author Share Posted March 25, 2007 Thanks guys I'll check em out :-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.