terribleturner Posted March 17, 2007 Share Posted March 17, 2007 Ok, so all my new gauges are in place and im now one by one putting the sensors in place. So after that i'll be setting the warning values. What's recommended for the below?? Oil Temp (120??) Oil Pressure (10??) Water Temp (120??) EGT (1100??) Link to comment Share on other sites More sharing options...
SUPRASUZUKI Posted March 17, 2007 Share Posted March 17, 2007 Ok, so all my new gauges are in place and im now one by one putting the sensors in place. So after that i'll be setting the warning values. What's recommended for the below?? Oil Temp (120??) Oil Pressure (10??) Water Temp (120??) EGT (1100??) A lot depends on where you're measuring. Probably worth putting that into the equation mate. Link to comment Share on other sites More sharing options...
Homer Posted March 17, 2007 Share Posted March 17, 2007 Can't help on the figures, but where is your EGT sensor? That'll determine what temperature the warning should be at. Link to comment Share on other sites More sharing options...
merckx Posted March 17, 2007 Share Posted March 17, 2007 Oil temp, I'm getting 95-100 Celsius, the proble is fitted in a sandwich plate. Link to comment Share on other sites More sharing options...
terribleturner Posted March 17, 2007 Author Share Posted March 17, 2007 Water Sensor is in the Top Rad pipe. Oil Temp will either be before the filter or in the sump. Oil Pressure again may be before the filter or possibly on the turbo feed just off the block. EGT after alot of thought is going to be put in the turbo. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now