Steve Posted April 6, 2007 Share Posted April 6, 2007 I would say they are, how do AbFlug get away with it on their lenses, which may I add cost £300 for the same lenses and black inserts, which I will also add I might not be so hastily buying now........... .....so YES, im interested..... Dont think they are legal either mate Link to comment Share on other sites More sharing options...
suprattgaz Posted April 6, 2007 Author Share Posted April 6, 2007 Does oncoming traffic agree? I guess the same gain you get with glass - remember mine have started to yellow! Link to comment Share on other sites More sharing options...
b_have Posted April 6, 2007 Share Posted April 6, 2007 Gaz, how quick can these be done? how many do you need to make to get the cost down? Link to comment Share on other sites More sharing options...
dandan Posted April 6, 2007 Share Posted April 6, 2007 Depending on cost I MAY be interested in two sets. I'd be more interested if the way to fix them to the light units was a bit more "proper" if that makes sense... Link to comment Share on other sites More sharing options...
suprattgaz Posted April 6, 2007 Author Share Posted April 6, 2007 Well as you can see the mould is done. Suppose if i phone up on Tuesday and give a figure they can do them that week. Trimming and finishing is important on these (as is all engineering) so don't want them to rush that. I guess out the door in 2 weeks. As for price, every set counts. It's = material + labour + (set-up time/no. of lenses) £70 is based on 10, £60 on 20.......... (20 = 10 pairs) Guess if it gets to 50 off (25 pairs) will be down the low end of £55 - £50 [not linear, material is expensive] Link to comment Share on other sites More sharing options...
suprattgaz Posted April 6, 2007 Author Share Posted April 6, 2007 Depending on cost I MAY be interested in two sets. I'd be more interested if the way to fix them to the light units was a bit more "proper" if that makes sense... Fully agree. This is just a hobby on the side for me, I am not a garage so will do as much as I can around normal work, house work etc. Trimming the old lens seems to work ok, gzaerojon has done some abflug in the same way. I could do the lip BUT will be more expense again (mould material etc). It is a gamble, if no-one was interested then I would pay more than just buying the original. Plus I was hoping to incorperate the fitment into the insert I will design (not definate yet) Link to comment Share on other sites More sharing options...
Mas Posted April 6, 2007 Share Posted April 6, 2007 if as mentioned no legal problems with clear lenses Im interested in a pair for my facelifts Link to comment Share on other sites More sharing options...
b_have Posted April 6, 2007 Share Posted April 6, 2007 Well as you can see the mould is done. Suppose if i phone up on Tuesday and give a figure they can do them that week. Trimming and finishing is important on these (as is all engineering) so don't want them to rush that. I guess out the door in 2 weeks. As for price, every set counts. It's = material + labour + (set-up time/no. of lenses) £70 is based on 10, £60 on 20.......... (20 = 10 pairs) Guess if it gets to 50 off (25 pairs) will be down the low end of £55 - £50 [not linear, material is expensive] OK, so we need 25+ names 1) b'have (2 sets if £50) Link to comment Share on other sites More sharing options...
Mas Posted April 6, 2007 Share Posted April 6, 2007 1) b'have (2 sets if £50) 2) Mas (1 set ) Link to comment Share on other sites More sharing options...
8800 Posted April 6, 2007 Share Posted April 6, 2007 im interested, also can help with doing the insert(low cost)...just let me know if u need any help Link to comment Share on other sites More sharing options...
8800 Posted April 6, 2007 Share Posted April 6, 2007 1) b'have (2 sets if £50) 2) Mas (1 set ) 3) 8800 Link to comment Share on other sites More sharing options...
suprattgaz Posted April 6, 2007 Author Share Posted April 6, 2007 I will leave the post running then till Tuesday morning, whatever the figures look like I will order that figure in the morning. Oh, and I suppose: 1) b'have (2 sets if £50) 2) Mas (1 set ) 3) 8800 4) Suprattgaz (dunno how many sets yet, 1 for me +......?) Link to comment Share on other sites More sharing options...
dazla Posted April 6, 2007 Share Posted April 6, 2007 I'm really interested:d pardon my ignorance mate but how are these fitted. Link to comment Share on other sites More sharing options...
suprattgaz Posted April 6, 2007 Author Share Posted April 6, 2007 I'm really interested:d pardon my ignorance mate but how are these fitted. In here - going for same finish - 1/4 price! https://www.mkivsupra.net/vbb/showthread.php?t=103257&highlight=abflug Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted April 6, 2007 Share Posted April 6, 2007 great for a spare set...i'm interested.. Link to comment Share on other sites More sharing options...
Suprash Posted April 6, 2007 Share Posted April 6, 2007 1) b'have (2 sets if £50) 2) Mas (1 set ) 3) 8800 4) Suprattgaz 5) Suprash - Legality ? Link to comment Share on other sites More sharing options...
Guest Phillw454 Posted April 6, 2007 Share Posted April 6, 2007 Intrested. how will these be fitted? very dumb i know but will you have to put the headlight in the oven to remove the top lense and then fit the new one? Sorry seems obvioious i know! Link to comment Share on other sites More sharing options...
dazla Posted April 7, 2007 Share Posted April 7, 2007 I still dont get it. Link to comment Share on other sites More sharing options...
suprattgaz Posted April 7, 2007 Author Share Posted April 7, 2007 I still dont get it. Look under headlight refurb, you will understand then. Link to comment Share on other sites More sharing options...
suprattgaz Posted April 7, 2007 Author Share Posted April 7, 2007 Intrested. how will these be fitted? very dumb i know but will you have to put the headlight in the oven to remove the top lense and then fit the new one? Sorry seems obvioious i know! Yep, or hot glue gun. Lens is held in with a glue that softens at low temperature. Link to comment Share on other sites More sharing options...
supra steveo Posted April 7, 2007 Share Posted April 7, 2007 hey they look good if only they were about when i i had my old J-spec lights i would of had a set Link to comment Share on other sites More sharing options...
Seifer Posted April 7, 2007 Share Posted April 7, 2007 1) b'have (2 sets if £50) 2) Mas (1 set ) 3) 8800 4) Suprattgaz 5) Suprash - Legality ? 6) Seifer Link to comment Share on other sites More sharing options...
suprattgaz Posted April 7, 2007 Author Share Posted April 7, 2007 1) b'have (2 sets if £50) 2) Mas (1 set ) 3) 8800 4) Suprattgaz 5) Suprash - Legality ? 6) Seifer 7) GazzaGSi Link to comment Share on other sites More sharing options...
Guest hbn Posted April 7, 2007 Share Posted April 7, 2007 This sounds interesting. How is it going? Link to comment Share on other sites More sharing options...
suprattgaz Posted April 7, 2007 Author Share Posted April 7, 2007 This sounds interesting. How is it going? http://www.mkivsupra.net/vbb/showthread.php?t=105889 !!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now