SUPRALOOPY Posted March 21, 2007 Share Posted March 21, 2007 I got mine fitted with Stainless steel which I bought somewhere in the midlands, and had delivered. I have a peice left which is enough for the front intake if required. The stuff from Halfords is a bit naff as it bends to easily and will tear when hit by stones. I'm liking that alot..I've just gone back to stock front and think that makes the stock bumper look MUCH better.. How much also? Thanks Dave;) Link to comment Share on other sites More sharing options...
peter richards Posted March 21, 2007 Share Posted March 21, 2007 i got mine from a company called potter and soar , i think they are in banbury oxford Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted March 21, 2007 Share Posted March 21, 2007 you've got THAT lip have you pete?? nice Link to comment Share on other sites More sharing options...
peter richards Posted March 21, 2007 Share Posted March 21, 2007 what lip dave , heres the site http://www.wiremesh.co.uk/ Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted March 21, 2007 Share Posted March 21, 2007 Sorry pete I want to know what front lip the black supe has on. I can get that mesh by the bucket load if needed. LOL Link to comment Share on other sites More sharing options...
AndrewOW Posted March 22, 2007 Share Posted March 22, 2007 I got some mesh from Halfrauds last eve, but will need to get another one when they have some in stock to finish it all. I'll get my bodyshop to fit it for me. I would like to do the rear wheel intakes too if I can. Link to comment Share on other sites More sharing options...
AndrewOW Posted March 22, 2007 Share Posted March 22, 2007 So now it looks like the Halfrauds (Ripspeed) stuff is quite inferior to some of the meshes that peeps are mentioning. I would like enough to do the front grille, the near side indicator vent and the rear wheel air intakes. Could someone point me in the right direction to get some of this please? Supraloopy maybe? Link to comment Share on other sites More sharing options...
Chewie Posted March 22, 2007 Share Posted March 22, 2007 Why don't you go to B & Q and look at the mesh they sell. Not chicken wire. They do zinc plated steel, brass, aluminium, plastic etc with loads of different meshsizes. And best of all it doesn't get marked up 10 times and resold as Toyota Supra grille mesh. Link to comment Share on other sites More sharing options...
AndrewOW Posted March 22, 2007 Share Posted March 22, 2007 Why don't you go to B & Q and look at the mesh they sell. Not chicken wire. They do zinc plated steel, brass, aluminium, plastic etc with loads of different meshsizes. And best of all it doesn't get marked up 10 times and resold as Toyota Supra grille mesh. That sounds like a sensible idea. I'll pop in there after work today. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now