Sheefa Posted February 22, 2007 Share Posted February 22, 2007 OK, I have, I believe a RR fitted, not sure what size and of course an on dash Boost Controller which I believe is a Blitz SB-II or something like that! The same as Hecklers and you can get a Power Meter for it too which looks pretty much the same. I've raised the boost, correctly I hope, to 1.2 Bar, but I never seem to see more than 0.76 on A) the boost controller reading itself and B) the mechnical greddy boost gauge I have fitted. Chris Wilson has tested everything and given the A-OK for fuelling etc, good mix - not lean or rich. I just wondered, do you only creep above 1bar, or 0.8 in my case when you hit a) silly speeds, or b) a higher rev limit near to the redline in a lower gear? I want to know that I can 'push' the car to the 1.2 bar level safely and it actually works. I also have Envy Hybrids fitted, but stock J-spec 440's. Any advice guys? I'm not sure if I'm configuring the BC correctly! Cheers, Greg Link to comment Share on other sites More sharing options...
michael Posted February 22, 2007 Share Posted February 22, 2007 What's a RR? Link to comment Share on other sites More sharing options...
Gaz6002 Posted February 22, 2007 Share Posted February 22, 2007 What's a RR? a) restrictor ring b) rolling road c) A very fast Aston I'll go with option a) please Bob Link to comment Share on other sites More sharing options...
michael Posted February 22, 2007 Share Posted February 22, 2007 Tft Link to comment Share on other sites More sharing options...
Sheefa Posted February 22, 2007 Author Share Posted February 22, 2007 Yes sorry Michael, Restrictor Ring. Thanks Gaz lol Michael tft?? Link to comment Share on other sites More sharing options...
michael Posted February 22, 2007 Share Posted February 22, 2007 Thanks for that HTH Link to comment Share on other sites More sharing options...
TrickTT Posted February 22, 2007 Share Posted February 22, 2007 You should see full boost by 4000rpm, maybe sooner, depending on your hybrids. Sounds like a setup/install problem with your boost controller. If the boost controller is turned off, or the solenoid is not working you'll only see about 0.7 - 0.8 bar Link to comment Share on other sites More sharing options...
Sharpie Posted February 22, 2007 Share Posted February 22, 2007 Have you had a read here on SBC setup ? http://www.mkivsupra.net/vbb/showthread.php?t=4547 Link to comment Share on other sites More sharing options...
Sheefa Posted February 22, 2007 Author Share Posted February 22, 2007 Thanks Rich, you're right mate, I'm not seeing anymore than 0.76 bar full stop! That link is good Peter - have had a read and started a new thread. Link to comment Share on other sites More sharing options...
SupraAyf Posted February 22, 2007 Share Posted February 22, 2007 Thanks Rich, you're right mate, I'm not seeing anymore than 0.76 bar full stop! That link is good Peter - have had a read and started a new thread. If you think it's going to be the solenoid unit under the bonnet then I have a spare one in my box of goodies;) Link to comment Share on other sites More sharing options...
Sheefa Posted February 22, 2007 Author Share Posted February 22, 2007 Thanks Andy. I'm hoping though that Chris Wilson would of spotted this. He replaced a few of the turbio solenoids anyway matey, so hopefully he spotted these, whatever it is, too. Just bloody confused pal! Link to comment Share on other sites More sharing options...
SupraAyf Posted February 22, 2007 Share Posted February 22, 2007 Thanks Andy. I'm hoping though that Chris Wilson would of spotted this. He replaced a few of the turbio solenoids anyway matey, so hopefully he spotted these, whatever it is, too. Just bloody confused pal! Hope things get sorted for you soon Greg mate;) Link to comment Share on other sites More sharing options...
Sheefa Posted February 22, 2007 Author Share Posted February 22, 2007 Cheers, here's hoping anyway. To many things have happened already in my Supra Ownership and one of them have been 'good'. Link to comment Share on other sites More sharing options...
Pete Posted February 22, 2007 Share Posted February 22, 2007 You bringing it on Tuesday Greg? Link to comment Share on other sites More sharing options...
Sheefa Posted February 22, 2007 Author Share Posted February 22, 2007 Certainly am Pete. Not going to track though mate as haven't got the cash, but if you're around and you fancy taking a look at this for me, you're more than welcome same with Chris etc! You definitely going then? Greg Link to comment Share on other sites More sharing options...
Pete Posted February 22, 2007 Share Posted February 22, 2007 You definitely going then? Booked and paid - so yep! I'll take it round the track for ya. (Test purposes only of course) Link to comment Share on other sites More sharing options...
Sheefa Posted February 22, 2007 Author Share Posted February 22, 2007 Yep, you're welcome mate. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now