fastisnice Posted July 6, 2004 Share Posted July 6, 2004 Just got my car back fitted with SP71 my new baby:) taking it straight to someone else who will finish it off(injectors/cams/mapping ECU), still was running with jap injectors and 0.8 and wow that thing was just flying,you dont know what a supra can do untill you go single!,the noise is unreal as well..i cant imagine how it will go with high boost and other bits.- Link to comment Share on other sites More sharing options...
CJ Posted July 6, 2004 Share Posted July 6, 2004 Mine goes in next week for its conversion - I cannot wait! Link to comment Share on other sites More sharing options...
Gaz Walker Posted July 6, 2004 Share Posted July 6, 2004 Nice one Kostas, glad to see its up and running Gaz. Link to comment Share on other sites More sharing options...
Supraguy Posted July 6, 2004 Share Posted July 6, 2004 Loads of singles going in. Great stuff! Link to comment Share on other sites More sharing options...
CJ Posted July 6, 2004 Share Posted July 6, 2004 Jay Looking at your specs, I see you use the Apexi SAFC. Do you use this for ignition timing and fuelling control? Link to comment Share on other sites More sharing options...
Supraguy Posted July 6, 2004 Share Posted July 6, 2004 Dont think the AFC can control the timing. I would need an ITC if I were to go that route. I really shouldnt have to worry about that unless I was really pushing the boost. My Blitz Access ECU is supposed to tweak the timing a bit though. Link to comment Share on other sites More sharing options...
Nick_TC Posted July 6, 2004 Share Posted July 6, 2004 Originally posted by CJ Jay Looking at your specs, I see you use the Apexi SAFC. Do you use this for ignition timing and fuelling control? S-AFC can't do timing, stick with your original plan. Link to comment Share on other sites More sharing options...
CJ Posted July 6, 2004 Share Posted July 6, 2004 Originally posted by Nick@TC S-AFC can't do timing, stick with your original plan. "cough"...erm...my cunning plan was to sell him the brand new Apexi ITC I have sitting in my garage Link to comment Share on other sites More sharing options...
Supraguy Posted July 6, 2004 Share Posted July 6, 2004 Rofl.. and how much you askin? Link to comment Share on other sites More sharing options...
CJ Posted July 6, 2004 Share Posted July 6, 2004 PM sent Link to comment Share on other sites More sharing options...
Nick_TC Posted July 6, 2004 Share Posted July 6, 2004 Originally posted by CJ "cough"...erm...my cunning plan was to sell him the brand new Apexi ITC I have sitting in my garage LMFAO Link to comment Share on other sites More sharing options...
MONKEYmark Posted July 6, 2004 Share Posted July 6, 2004 nice to see another single out there, get some pics up. its heating up a bit now. lots of big power supras out there. Link to comment Share on other sites More sharing options...
dude Posted July 6, 2004 Share Posted July 6, 2004 Originally posted by fastisnice Just got my car back fitted with SP71 my new baby:) taking it straight to someone else who will finish it off(injectors/cams/mapping ECU), still was running with jap injectors and 0.8 and wow that thing was just flying,you dont know what a supra can do untill you go single!,the noise is unreal as well..i cant imagine how it will go with high boost and other bits.- Do you have a 0.8 wastegate spring Kostas ???? Dude:flame Dev Link to comment Share on other sites More sharing options...
Supraguy Posted July 7, 2004 Share Posted July 7, 2004 The spring on my PHR kit is for 12psi which ~0.82 bar, which sounds about right. You can get different spring settings by asking your manufacturer. Link to comment Share on other sites More sharing options...
Dragonball Posted July 7, 2004 Share Posted July 7, 2004 Saw this baby last night - Bloody HUUUUGE big thing in the engine bay - looks the dogs....! Considering it wasn't mapped or anything ran suprisingly smoothly just on stock set up! Greece isn't going to know what hit her! Link to comment Share on other sites More sharing options...
fastisnice Posted July 7, 2004 Author Share Posted July 7, 2004 hihihihi yeah thats right!, no dude, it has been set up at 0.8 via avc-r, anyway now its back to the garage for crower cams 272, and a complete SP fuel kit with 1000cc injectors blah blah blah, when i get it back i think i will be shocked!. Big single is the ONLY way to go. Link to comment Share on other sites More sharing options...
fastisnice Posted July 7, 2004 Author Share Posted July 7, 2004 Oh, funny thing happened to me yesterday, i was in streatham dropping the car off and i saw a police car going the other direction, after few seconds a boxster S was in front of me so i thought the police would be far enough by then, green light is on he goes for it and i overtook him by boosting to 5,500 on 2nd gear for a laugh, at the lights i heard siren behind me, they came next to me asked me to pull over, i did and the policeman told me: " I was down the road half a mile and i could hear your car, judging by the noise you were going very fast, slow down, i said"ok sir", but it wasnt the speed my car is a little bit loud, the he replied"hmm a little bit loud.just watch your speed", and he left. :flame Dev :flame Dev :flame Dev :flame Dev Link to comment Share on other sites More sharing options...
dude Posted July 7, 2004 Share Posted July 7, 2004 Originally posted by fastisnice hihihihi yeah thats right!, no dude, it has been set up at 0.8 via avc-r, anyway now its back to the garage for crower cams 272, and a complete SP fuel kit with 1000cc injectors blah blah blah, when i get it back i think i will be shocked!. Big single is the ONLY way to go. You must have a .8 bar WG spring as the AVC-R cant reduce boost , will you only be running 1.6 bar when shes all mapped etc , bet you cant wait to have it on full power !! When do you think you will be able to run it at the Pod etc ??? Dude:flame Dev Link to comment Share on other sites More sharing options...
Guest Terry S Posted July 7, 2004 Share Posted July 7, 2004 Originally posted by dude You must have a .8 bar WG spring as the AVC-R cant reduce boost , will you only be running 1.6 bar when shes all mapped etc , bet you cant wait to have it on full power !! When do you think you will be able to run it at the Pod etc ??? Dude:flame Dev Agreed the boost controller can only up the boost. Link to comment Share on other sites More sharing options...
fastisnice Posted July 7, 2004 Author Share Posted July 7, 2004 I have absolutely everything to rebuild my engine rods/pistons/gaskets/tit valve retainers but i run out of time at this stage (my mechanic had to leave abroad for few weeks) and i have to leave for Greece so at this moment i wont see the full potential(but i cant wait honest!)....i will only be able to run 1.5/1.6 bar for the next few months. Still i would like to go down to Santa Pod in September and check out what it can do. My plan is around Christmas to finish it off and have some fun at POD!!. Dude:My friend was at the Pod and i was told your Supra goes the bullocks!!, well done!! you got some awesome times down!.What turbo/ECU and what bhp are you having? Link to comment Share on other sites More sharing options...
dude Posted July 7, 2004 Share Posted July 7, 2004 Originally posted by fastisnice I have absolutely everything to rebuild my engine rods/pistons/gaskets/tit valve retainers but i run out of time at this stage (my mechanic had to leave abroad for few weeks) and i have to leave for Greece so at this moment i wont see the full potential(but i cant wait honest!)....i will only be able to run 1.5/1.6 bar for the next few months. Still i would like to go down to Santa Pod in September and check out what it can do. My plan is around Christmas to finish it off and have some fun at POD!!. Dude:My friend was at the Pod and i was told your Supra goes the bullocks!!, well done!! you got some awesome times down!.What turbo/ECU and what bhp are you having? Thanks Costas !!! , Turbo/kit is Boost Logic GTQ71 and the ECU is stock based (mines) with SAF-C and ITC , look forward to seeing your car finished and running , if you need any help etc just ask . Dude:flame Dev Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now