carl0s Posted February 16, 2007 Share Posted February 16, 2007 Anyone got a good writeup? I seem to remember using a good one last time. I've found the one at mkiv.com, which points me to the free-fcd mod for additional pictures, but this is a Jap spec car. Help!? Link to comment Share on other sites More sharing options...
carl0s Posted February 16, 2007 Author Share Posted February 16, 2007 Shall I just tee off the hose which goes into the bottom of the stock Turbo Pressure Sensor? This would seem to make sense.. Link to comment Share on other sites More sharing options...
Jake Posted February 16, 2007 Share Posted February 16, 2007 http://www.max-boost.co.uk/max-boost/Gotchas_2JZGTE.htm Boost signal pickup This is the correct place if you need to tap into the boost signal (installing a boost gauge, pressure switch etc...) http://www.max-boost.co.uk/max-boost/images/supra/intake/boost_gauge_pickup_point_sm.jpg Do not use the one next to it because you risk engine meltdown if it pops off under boost - the FPR also uses that one, better leave it alone! Link to comment Share on other sites More sharing options...
carl0s Posted February 16, 2007 Author Share Posted February 16, 2007 Hmm. I tee-d off the stock Pressure Sensor, the one with the green sticker on top, which I think might be the one that it says *not* to use. Oh well Just fitted my Thor FCC to the new Fields-type Harness. How lovely it was doing all the soldering/heatshrinking/taping whilst watching TV (as opposed to doing it upside down in the passenger footwell) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now