MarkR Posted February 15, 2007 Share Posted February 15, 2007 Hi peeps I have a VVTI and the wire in the harness that the manual (and an article on the forum) said i should wire it to, seems to be the wrong one. When i drive at 25 and press the calibration button, it says "calibration error". I can only assume that means that my orange wire is not connected to the speed wire on the ecu? I have connected it to the following wire on my car. The funny thing is that the MPH to KPH convertor goes nowhere near this wire. Also, the guys who installed my SBD (won't say who but i've seen people complain about them before) in their infinite wisdom decided to HOTGLUE the controller to my dash and in the process filled up the infrared sensor on my boost controller. Anyone know of a solvent that will remove the glue and not eat the plastic on my boost controller? Any ideas? Cheers Mark Link to comment Share on other sites More sharing options...
MarkR Posted February 16, 2007 Author Share Posted February 16, 2007 Anyone? Link to comment Share on other sites More sharing options...
MarkR Posted July 20, 2007 Author Share Posted July 20, 2007 I'm still twisting in the breeze...... Link to comment Share on other sites More sharing options...
joeblitz Posted July 20, 2007 Share Posted July 20, 2007 how old is the car ive looked up the blitz manual for speedo wire can't see one for vvti ...found one on a defi manual but looks different to your picture when doing the set up leave it in kph and at 25mph press enter ....then change to mph in menu... can fax the defi page Link to comment Share on other sites More sharing options...
Supra ST Myster Posted July 20, 2007 Share Posted July 20, 2007 i will be able to tell you tomorrow when i get on my other pc as have practially all connections for all ecu types for the supra, something i knocked up on excel with a drawing of each ecu.. Link to comment Share on other sites More sharing options...
MarkR Posted July 21, 2007 Author Share Posted July 21, 2007 Thanks guys Link to comment Share on other sites More sharing options...
Pete Posted July 22, 2007 Share Posted July 22, 2007 That's the correct pin. Pink wire. Link to comment Share on other sites More sharing options...
MarkR Posted July 22, 2007 Author Share Posted July 22, 2007 Hmmm.. i might follow it to the speedo cluster. Cheers Pete Link to comment Share on other sites More sharing options...
MarkR Posted August 15, 2007 Author Share Posted August 15, 2007 Found it. The guys who installed my MPH to KPH thing cut the wires behind my cluster and ran their own... NICE!!! Anyway, all connected and loving it Thanks for your help guys Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now