monkey76364 Posted February 13, 2007 Share Posted February 13, 2007 Ok I think these are the same as my wheels will get a pic in the next hour.... Who knows where i could get the center caps from? mine are different but i think they should fit.... or am I wrong??? Quote Link to comment Share on other sites More sharing options...
monkey76364 Posted February 15, 2007 Author Share Posted February 15, 2007 As far as i can Find out they are Sparco Pythons.... any one have a any ideas??? Quote Link to comment Share on other sites More sharing options...
Max Headroom Posted February 15, 2007 Share Posted February 15, 2007 I have a set of shiney billet aluminium centre caps that might fit Quote Link to comment Share on other sites More sharing options...
Dave F Posted February 15, 2007 Share Posted February 15, 2007 Dont think they would fit mate as your centre caps are not round, they have little cut outs. Mine are in at the moment having the paint redone I will ask if they can take the measurements and come up with some ideas. Quote Link to comment Share on other sites More sharing options...
stupra Posted February 15, 2007 Share Posted February 15, 2007 Dont think they would fit mate as your centre caps are not round, they have little cut outs. Mine are in at the moment having the paint redone I will ask if they can take the measurements and come up with some ideas. Hope they're not charging you mate... Quote Link to comment Share on other sites More sharing options...
monkey76364 Posted February 15, 2007 Author Share Posted February 15, 2007 Hope they're not charging you mate... Cheers Dave.... you know how long i have been loking for these now, it's doinf my head in. Quote Link to comment Share on other sites More sharing options...
Dave F Posted February 15, 2007 Share Posted February 15, 2007 Hope they're not charging you mate... No they were really helpful and said if it happens again they will re do all the wheels without the chrome topcoat in any colour I want. Quote Link to comment Share on other sites More sharing options...
Dave F Posted February 15, 2007 Share Posted February 15, 2007 Cheers Dave.... you know how long i have been loking for these now, it's doinf my head in. They lathed down my caps very slightly to remove a couple of chips on the edge so there should be no reason why the could'nt lathe down a set to match the size you need. Quote Link to comment Share on other sites More sharing options...
monkey76364 Posted February 15, 2007 Author Share Posted February 15, 2007 They lathed down my caps very slightly to remove a couple of chips on the edge so there should be no reason why the could'nt lathe down a set to match the size you need. well if they can let me know !!! Quote Link to comment Share on other sites More sharing options...
Dave F Posted February 15, 2007 Share Posted February 15, 2007 Should be finished for tomorrow, I'll report back Quote Link to comment Share on other sites More sharing options...
monkey76364 Posted February 15, 2007 Author Share Posted February 15, 2007 Should be finished for tomorrow, I'll report back Cheers mate... you any good at changing disks?? lol Quote Link to comment Share on other sites More sharing options...
Dave F Posted February 15, 2007 Share Posted February 15, 2007 Of course:) Quote Link to comment Share on other sites More sharing options...
monkey76364 Posted February 15, 2007 Author Share Posted February 15, 2007 Of course:) may have to call on you then in a wek or so for advice lol so much to do when i get the last few bits in the post in the next day or 2 Quote Link to comment Share on other sites More sharing options...
CraigGilchrist Posted February 16, 2007 Share Posted February 16, 2007 Ok, I'm gonna seem like a 'tard, but I have these alloys. They were on my Supra when i bought it (few months ago now). the car came with no tools, so I'm not sure how to get the centre caps off (Haven't tried, maybe it can be done by hand?). Got to change the brake pads soon, and give the calipers a lick of paint so I'll need to take them off at some point. Just got to hope I don't get a flat tyre before then... (Sorry to derail your thread, but it's kinda related. Quote Link to comment Share on other sites More sharing options...
monkey76364 Posted February 16, 2007 Author Share Posted February 16, 2007 Ok, I'm gonna seem like a 'tard, but I have these alloys. They were on my Supra when i bought it (few months ago now). the car came with no tools, so I'm not sure how to get the centre caps off (Haven't tried, maybe it can be done by hand?). Got to change the brake pads soon, and give the calipers a lick of paint so I'll need to take them off at some point. Just got to hope I don't get a flat tyre before then... (Sorry to derail your thread, but it's kinda related. I know Dave had a little tube thing that slid over them and twisted them off (more like nunts on mine). But the wheels have been off at the garage before and i asume the are just very hand tight ! Quote Link to comment Share on other sites More sharing options...
Dave F Posted February 16, 2007 Share Posted February 16, 2007 Yeah I have the sleeve that fits over the nut so they are a pain to get off by hand (for those thieving b####ds of the world). ps John wont be going to the wheel place until monday now I'll update you as soon as I've beeen. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.