egrossi Posted February 11, 2007 Share Posted February 11, 2007 Well guys, Wish me luck as off to Homebase to get the stuff and going to tackle that annoying yellow tints. Will put pics up as soon as I done one. Quote Link to comment Share on other sites More sharing options...
rik Posted February 11, 2007 Share Posted February 11, 2007 Good luck. Mine came out ok. Quote Link to comment Share on other sites More sharing options...
Konrad Posted February 11, 2007 Share Posted February 11, 2007 What stuff you will use to refurb? Quote Link to comment Share on other sites More sharing options...
edge Posted February 11, 2007 Share Posted February 11, 2007 Can you do some before and after shots please. And maybe a few in between with a quick description? THANKS Quote Link to comment Share on other sites More sharing options...
Guest gzaerojon Posted February 11, 2007 Share Posted February 11, 2007 good luck matey get some alcohol type stuff to clean the rubber edges followed by something with silicone in (like cockpit shine) brings the rubbers up like new Quote Link to comment Share on other sites More sharing options...
egrossi Posted February 11, 2007 Author Share Posted February 11, 2007 cheers guys following following supraloopy's directions back home now and about to get cooked in oven. Towel round them to stop grates melting rubber. Quote Link to comment Share on other sites More sharing options...
egrossi Posted February 12, 2007 Author Share Posted February 12, 2007 Well guys and gals, Was at it for hours yesterday scrubing and rubbing and they came out a treat. Thanks to Supraloopys directions and a top tip to place in oven covered in a towel. Yes burnt myself taking them out, muppet. Sorry took pics but there to big than the attachments will allow. If anyone knows how to reduce size jpeg I will sort and post. Quote Link to comment Share on other sites More sharing options...
rik Posted February 12, 2007 Share Posted February 12, 2007 Email it to me, i'll resize for ya Quote Link to comment Share on other sites More sharing options...
rik Posted February 12, 2007 Share Posted February 12, 2007 Here they are. I'll let egrossi tell what order they should go in Quote Link to comment Share on other sites More sharing options...
egrossi Posted February 12, 2007 Author Share Posted February 12, 2007 Hi all, Thanks again to rik for re-sizing. However, the last photo is before and the light on the floor is a completed. The others are completed and on, so far so good re-heated and put back together without any extra window sealer and no condensation as of yet, and its be raining all day. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.