Jump to content
The mkiv Supra Owners Club

1.1 bar restritor ring


r1george

Recommended Posts

Hi, Just about to decat my j-spec TT but need to get a restrictor ring. I can get the flange laser cut from stainless steel plate but need to know the hole size for 1.1 bar.:help:

If anyone can help I would be very grateful.:)

 

I just fitted a walbro pump which with the help of this site went very well. Only took 3/4 hr and that was taking my time.

 

I bought the pump off ebay from the US for £60 all in including delivery from California and was ammazed at the delivery time (4 days over christmas).

 

Carl

Link to comment
Share on other sites

Carl, I believe 1 bar is 2 inches in diameter if that helps mate. You can start there and file it bigger accordingly.

 

Hi, Just about to decat my j-spec TT but need to get a restrictor ring. I can get the flange laser cut from stainless steel plate but need to know the hole size for 1.1 bar.:help:

If anyone can help I would be very grateful.:)

 

I just fitted a walbro pump which with the help of this site went very well. Only took 3/4 hr and that was taking my time.

 

I bought the pump off ebay from the US for £60 all in including delivery from California and was ammazed at the delivery time (4 days over christmas).

 

Carl

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.