Guest CoolsBlue Posted January 1, 2007 Share Posted January 1, 2007 EPC pics of the above please thankyou Link to comment Share on other sites More sharing options...
merckx Posted January 1, 2007 Share Posted January 1, 2007 Are you wanting the part numbers for the fixings to secure the door cards? The below assumes that all the fixings on the bare door are present and correct. I've put a red dot next to the fixings for securing the door card. The number in the bracket is the quantuty you need per door. You'll also need 93520-54016 , one for each door (it secures the rectangular trim that goes around the door release lever ) There's also a larger screw which goes in behind this trim, 90159-60303 , one for each door. There's also a screw and cap which goes in through the top of the door armrest. 90119-05039 & 90339-10002-CO . Again one per door. Some of the part numbers on the aerial pic aren't shown, just ask if you need them- (the 5 digit numbers aren't complete). Link to comment Share on other sites More sharing options...
Guest CoolsBlue Posted January 1, 2007 Share Posted January 1, 2007 wow! thats so helpful, thankyou! all i needed to know was the part numbers for screws and fittings. have you got an EPC pic of the pass side pill grab handle and the drivers seat by any chance? Link to comment Share on other sites More sharing options...
merckx Posted January 1, 2007 Share Posted January 1, 2007 74610A , full part no : 74610-24050-CO 74681 , full part no : 74681-14010 74682 , full part no : 74682-14010 What do you need for the drivers seat, there's more than one pic? ........... ........... Link to comment Share on other sites More sharing options...
Guest CoolsBlue Posted January 1, 2007 Share Posted January 1, 2007 well there is a little handle on the side to move the back rest foward and backward, would like a epc pic of the plastic cover and screws real image attatched Link to comment Share on other sites More sharing options...
merckx Posted January 1, 2007 Share Posted January 1, 2007 Is the seat electric , if so : I hope this is the correct pic. The handle (72525A) is: 72525-14020-CO Link to comment Share on other sites More sharing options...
Guest CoolsBlue Posted January 1, 2007 Share Posted January 1, 2007 thats fine mate, thanks for all your help! nice one Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now