johnd-mkiv Posted March 12, 2007 Share Posted March 12, 2007 nice one mate - im pritty sure I can get the blocks done - I did take lots of measurments from my own car when I altered my discs just incase you guys called me at some point . I hope its going well for mark down there. Let me know mate - thanks I just got granted the hobby licence on here too :) any news on the blocks mate I have just bought a set of calipers might be interested in a pair tried to pm you but your box is full Quote Link to comment Share on other sites More sharing options...
michael Posted March 12, 2007 Share Posted March 12, 2007 I presume the brakes on the VIII don't warp as easily as the ones on the earlier models? Quote Link to comment Share on other sites More sharing options...
Lebsteif Posted September 23, 2007 Share Posted September 23, 2007 Kick, i'm interested in these brakes as well, could someone post or email me the drawings? Quote Link to comment Share on other sites More sharing options...
lovatt Posted September 24, 2007 Share Posted September 24, 2007 i have a full set of front evo 8 Brembo 4pot calipers, disks and pads for sale as i have just gone for an alcon 6 pot setup on my XT400 if anyone is interested Quote Link to comment Share on other sites More sharing options...
Lebsteif Posted March 3, 2008 Share Posted March 3, 2008 Anyone got a rear set for sale? Quote Link to comment Share on other sites More sharing options...
JamieP Posted March 3, 2008 Share Posted March 3, 2008 Ive got a set of fronts forsale for £250 off my evo 9 they done 15k Quote Link to comment Share on other sites More sharing options...
Lebsteif Posted March 3, 2008 Share Posted March 3, 2008 That's a bargain! Quote Link to comment Share on other sites More sharing options...
scottysupra Posted April 4, 2008 Share Posted April 4, 2008 Ive got brembo front calipers for my supra too so would be interested in some measurements or pictures of mounting brackets if at all possible??? Quote Link to comment Share on other sites More sharing options...
johnd-mkiv Posted April 5, 2008 Share Posted April 5, 2008 Ive got brembo front calipers for my supra too so would be interested in some measurements or pictures of mounting brackets if at all possible??? your best of buying a spare stub axel, put your disk on that then mount the caliper, make a template from cardbord and go from there as the brackets will require a fair bit of shaping. From memory the brackets need to be 12mm to give the right spacing Quote Link to comment Share on other sites More sharing options...
paul mac Posted April 5, 2008 Share Posted April 5, 2008 Ive got brembo front calipers for my supra too so would be interested in some measurements or pictures of mounting brackets if at all possible??? you need to be carefull mate these cannot be made out of a bit of old angle iron, they need to be accurately machined and strong, if you are not 100% sure what you are doing, find someone who is to do it for you Quote Link to comment Share on other sites More sharing options...
scottysupra Posted April 5, 2008 Share Posted April 5, 2008 you need to be carefull mate these cannot be made out of a bit of old angle iron, they need to be accurately machined and strong, if you are not 100% sure what you are doing, find someone who is to do it for you Thats o.k im getting a friend to machine them for me i wouldnt attempt to make them myself i will be fitting them though. If anyone does have measurements though i would appreciate it it would make his life alot easier Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.