sipstrassi Posted December 23, 2006 Share Posted December 23, 2006 Hope someone can help. I am trying to a fit HID conversion kit to my car. Fitted one side ok - i think I have a connector spare on the other side. Any help would be greatly appreciated...epsecially since it is now dark. Cheers Pete Link to comment Share on other sites More sharing options...
Jake Posted December 23, 2006 Share Posted December 23, 2006 More info needed. You have a spare connector where? What make is the kit? A photo would probably help us understand what the problem is. Link to comment Share on other sites More sharing options...
sipstrassi Posted December 23, 2006 Author Share Posted December 23, 2006 I bought these off the group buy. The one for £100. I have used the rely supplied. Plugged this into the ballast and plugged the ballast into the bulb There are two connectors coming off the bulb one obvoiusly fits onto original light connector and i have a spare connector that goes nowhere. Hope this helps. Pete Link to comment Share on other sites More sharing options...
sipstrassi Posted December 23, 2006 Author Share Posted December 23, 2006 will try again when its light...and not so cold. Link to comment Share on other sites More sharing options...
ChrisSZ Posted December 23, 2006 Share Posted December 23, 2006 You should end up with a spare connector from one set of lights - one side acts as the switch and the other side becomes spare (I assume you are talking about the connectors on the original harness??) Link to comment Share on other sites More sharing options...
sipstrassi Posted December 24, 2006 Author Share Posted December 24, 2006 Thanks. Finally sorted it this morning. They look real good - white and bright. now to find some time in the festive season to do my fogs. Pete Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now