hodge Posted December 20, 2006 Share Posted December 20, 2006 I have a j-spec TT. At present the car is fitted with:- Walbro pump 1st Decat HKS Hi-power exhaust (cat back). E01 Boost controller also used as a FCD (with external harness). Induction Kit. Front mount intercooler with hard pipes. Also what sort of power would I be looking at if I fitted a 2nd decat and restrictor ring. if i can hit the big 400BHP ill be happy with that, (for now i suppose). Quote Link to comment Share on other sites More sharing options...
colsoop Posted December 20, 2006 Share Posted December 20, 2006 What boost are you running ? Quote Link to comment Share on other sites More sharing options...
hodge Posted December 20, 2006 Author Share Posted December 20, 2006 1.2 bar. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 20, 2006 Share Posted December 20, 2006 I'd say about 320 to 340 BHP Quote Link to comment Share on other sites More sharing options...
wkdtime Posted December 20, 2006 Share Posted December 20, 2006 I'd say about 320 to 340 BHP ATW's obviously. Quote Link to comment Share on other sites More sharing options...
SupraJames Posted December 20, 2006 Share Posted December 20, 2006 320 to 340 sounds about spot on, I run a UK Spec with similar set-up just with IK24 plugs and Full decat and at 1.1 bar boost it ran 375 at the hubs. Quote Link to comment Share on other sites More sharing options...
hodge Posted December 20, 2006 Author Share Posted December 20, 2006 What some of extra mods would I need for 400BHP then Quote Link to comment Share on other sites More sharing options...
SupraJames Posted December 20, 2006 Share Posted December 20, 2006 Poss bigger injectors, maybe go up to 550's and FPR, may need hybrid turbos to as the J-Spec ones would max out before 400 I think, but im no tech expert. I also have a 1.6mm HKS Head Gasket fitted, but not sure how much difference that makes. Quote Link to comment Share on other sites More sharing options...
SupraAyf Posted December 20, 2006 Share Posted December 20, 2006 What some of extra mods would I need for 400BHP then Tuned up hybrids or even a small single on low pressure would do the job mate. Quote Link to comment Share on other sites More sharing options...
Sheefa Posted December 20, 2006 Share Posted December 20, 2006 I'm on Hybrids, standard j-spec injectors, full decat running no more than 1.1 bar boost. Old owner had 430-35 at the the fly (380 wheels iirc) on 1.1 bar before the hybrids were fitted - got the dyno printout. So, I should hit the 400 mark I think at the wheels with this turned up to 1.2? New FMIC to accomodate etc. Am I dreaming? Quote Link to comment Share on other sites More sharing options...
bolarbag Posted December 20, 2006 Share Posted December 20, 2006 Are you not at risk of running seriously lean with an attempt at 460odds running standard jap injectors? What does the Sup lose through the Tranny?I thought it was around 15-20% on a manual...not sure about an auto...u running any piggy back ecu or fuel controller? Quote Link to comment Share on other sites More sharing options...
Graham S Posted December 20, 2006 Share Posted December 20, 2006 If its any comparison I ran 404bhp with a full decat and HKS hiper exhaust! But thats a UK spec manual.. Quote Link to comment Share on other sites More sharing options...
Sheefa Posted December 20, 2006 Share Posted December 20, 2006 Bolarbag, I'm not pushing it any further unless I sort out the fuelling, new injectors and EManage etc. Chris Wilson says it's safe for the timebeing so I'll take his word happily. To be honest, I rarely creep above 1 bar of boost! So should be fine at the mo. Greg Quote Link to comment Share on other sites More sharing options...
Homer Posted December 20, 2006 Share Posted December 20, 2006 If its any comparison I ran 404bhp with a full decat and HKS hiper exhaust! But thats a UK spec manual.. They're talking rear wheel hp mate 400rwhp on stocker or hybrids is out of the question IMO, unless you visit someone with a hub dyno Thats small single territory. Stock injectors simply cannot flow enough fuel to make that sort of power. Quote Link to comment Share on other sites More sharing options...
Rich Posted December 20, 2006 Share Posted December 20, 2006 try some cams,they will add a bit more power Quote Link to comment Share on other sites More sharing options...
SupraAyf Posted December 20, 2006 Share Posted December 20, 2006 try some cams,they will add a bit more power I also find that a few shiny bits in the engine bay help make my car go faster! Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 21, 2006 Share Posted December 21, 2006 ATW's obviously. No, flywheel horsepower. Quote Link to comment Share on other sites More sharing options...
imi Posted December 21, 2006 Share Posted December 21, 2006 I'm on Hybrids, standard j-spec injectors, full decat running no more than 1.1 bar boost. Old owner had 430-35 at the the fly (380 wheels iirc) on 1.1 bar before the hybrids were fitted - got the dyno printout. So, I should hit the 400 mark I think at the wheels with this turned up to 1.2? New FMIC to accomodate etc. Am I dreaming? 380 @ the wheels on stock turbos is amazing, with hybrids (400 @ the wheels is fantastic). I dont think ANYONE has managed that before, certainly not on this forum anyway. Your car must be special./. Quote Link to comment Share on other sites More sharing options...
JohnA Posted December 21, 2006 Share Posted December 21, 2006 No, flywheel horsepower. Chris, you're in killjoy mode. These are festive days, do you really think anybody wants to hear The Truth? ...C'mon, throw the dog a bone... Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 21, 2006 Share Posted December 21, 2006 I tell it as it is, Christmas or not I spend too much time around engine dynos to give credence to 90% of rolling road figures. A friend has a Dyna pack, I have to ask him to give a "real" reading whenever I take anything there, as he is forced to give unrealistic ones in order for the boy racers to use his facility, and who pay for his rent. Sad, but the rolling road lot tend to just get sucked into a spiral of inflated figures to keep the customers `appy. Quote Link to comment Share on other sites More sharing options...
silvershark44 Posted December 21, 2006 Share Posted December 21, 2006 I tell it as it is, Christmas or not I spend too much time around engine dynos to give credence to 90% of rolling road figures. A friend has a Dyna pack, I have to ask him to give a "real" reading whenever I take anything there, as he is forced to give unrealistic ones in order for the boy racers to use his facility, and who pay for his rent. Sad, but the rolling road lot tend to just get sucked into a spiral of inflated figures to keep the customers `appy. surely that makes them close to pointless then? Quote Link to comment Share on other sites More sharing options...
imi Posted December 21, 2006 Share Posted December 21, 2006 surely that makes them close to pointless then? How did you work that one out? Quote Link to comment Share on other sites More sharing options...
JohnA Posted December 21, 2006 Share Posted December 21, 2006 ...Sad, but the rolling road lot tend to just get sucked into a spiral of inflated figures to keep the customers `appy. I call it 'Power to the People' Sadly, not much has changed since I wrote that piece. In fact, RR inflation has got worse. Perhaps we need a correcting action for the market, same as in economics:D Quote Link to comment Share on other sites More sharing options...
jase_93tt Posted December 21, 2006 Share Posted December 21, 2006 When my supe was BPU (2nd decat, 1.2bar, full stainless 90mm bore exhaust, aftermarket filter, 3row FMIC, decent plugs- 1 grade colder than stock), I got an average of 290rwhp-300rwhp on the dyno. Mines a Jspec auto btw. Quote Link to comment Share on other sites More sharing options...
JohnA Posted December 21, 2006 Share Posted December 21, 2006 Pffff...JSpecs here make 326 out of the box. More with filters and DVs Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.