Sheefa Posted December 17, 2006 Share Posted December 17, 2006 !!!!!!!!! SOLD !!!!!!!!! Hi guys, I've replaced my FMIC with a new Greddy 2-row FMIC. The intercooler was involved in an accident but is in good condition. A few bent fins on one side (maybe some on the other iirc) but that's about it. You'll need a bracket to fit it, but should be fairly easy to fabricate. I've also got 2 pipes for the FMIC in perfect condition with couplings and silicone hosing. The other 2 are bent (may, and I say may be able to straighten?), but I can supply these so you can either fabricate your own or replace them with others. It was running faultlessly before the crash and was following ti too. boost leaks only seem to be coming from damaged pipes. It was NEW as well in July so a little annoyed! Looking for offers. I think the intercooler is a Wilson Racing one by the looks of things??? Not sure though. Open to sensible offers but really can't offer any guarantees people. Will post pics tomoz Cheers, Greg Link to comment Share on other sites More sharing options...
flukey-lukey Posted December 17, 2006 Share Posted December 17, 2006 interested - but will wait to see pics Link to comment Share on other sites More sharing options...
Sheefa Posted December 17, 2006 Author Share Posted December 17, 2006 I'll try and get some now actually Link to comment Share on other sites More sharing options...
flukey-lukey Posted December 17, 2006 Share Posted December 17, 2006 I'll try and get some now actually cool, ill check them out in a bit as I'm off out now Link to comment Share on other sites More sharing options...
Sheefa Posted December 17, 2006 Author Share Posted December 17, 2006 Here we go guys.............. That picture of the intercooler is the WORST side! There's not loads of bent fins and I'm sure a lot of thwem can be straightend. I can't upload all the pics here, so please PM me your email if interested for more close ups The pipes are fine everywhere else, just the main entrance/exit that's bent, although one is pretty knackered and has buckled badly. That's probably the only one that needs fabricating IMO. Cheers, Greg Link to comment Share on other sites More sharing options...
Guest mk47 Posted December 17, 2006 Share Posted December 17, 2006 hi greg could you pm me a rough idea of what your after please mate? Link to comment Share on other sites More sharing options...
Sheefa Posted December 17, 2006 Author Share Posted December 17, 2006 I've had one offer for £70 guys and that's highest so far. So, I'll leave this to run until Wednesday to give others the chance of sneaking in there. BTW, Collection is preferred as you'll pay a fortune for postage and at least then you can inspect everything in your own time. I' happy with that Thanks, Greg Link to comment Share on other sites More sharing options...
Sheefa Posted December 18, 2006 Author Share Posted December 18, 2006 Bump - £75 is the latest. Need the room in garage guys, so will give this until tomoz evening. Collection is obviously preferred! Thanks, Greg Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 18, 2006 Share Posted December 18, 2006 Worth every penny of 120 IMO. Pipes may straighten enough to reuse with care, especially if someone takes them to an exhaust manufacturer with expanding mandrels to re shape the ends, and experience of bending tubes. They will never be as new though unless you get some fabricated from scratch. AFAIK no brackets are missing, you just need about 3 bolts and nuts and some washers to use as spacers. The I/C itself is in better nick than a lot of front mounts in regular use! Link to comment Share on other sites More sharing options...
Sheefa Posted December 18, 2006 Author Share Posted December 18, 2006 Thanks Chris! As long as it wasn't a nightmare to get off all is good. Greg Link to comment Share on other sites More sharing options...
Lucifer Posted December 18, 2006 Share Posted December 18, 2006 £120 Link to comment Share on other sites More sharing options...
Sheefa Posted December 18, 2006 Author Share Posted December 18, 2006 Sounds good to me Martin. If anyone else is interested please PM me. I'm happy to send a few more photos to anyones email if needed. Martin - do you want a few more piccies or are these OK? Cheers, Greg Link to comment Share on other sites More sharing options...
Sheefa Posted December 19, 2006 Author Share Posted December 19, 2006 Provisionally sold. More pics attached anyway for the buyer. First additional pic is of the good side. The only bent fins are in small patch where there's some sticky tape on it to stop it rubbing against the viscous fan. Second pic is one of the worst side, not many bent ones really. Cheers. Greg Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 19, 2006 Share Posted December 19, 2006 It's a viscous fan, what you did to it was vicious, your word seems somewhere between the two?? .... Link to comment Share on other sites More sharing options...
Sheefa Posted December 19, 2006 Author Share Posted December 19, 2006 It's a viscous fan, what you did to it was vicious, your word seems somewhere between the two?? .... Thanks Chris! Always nice to see someone clarifying my poor spelling. Yes, I may have been a little forceful to the poor metal blighter. Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 19, 2006 Share Posted December 19, 2006 Patience and a scriber, or other ponted object, wielded soberly and carefully would have the fins near as damn it as new, so don't let them put potential buyers off. I can't believe it's not sold yet. Link to comment Share on other sites More sharing options...
Sheefa Posted January 2, 2007 Author Share Posted January 2, 2007 BUMP - Back up for sale I believe as Martin is now selling his Supra Link to comment Share on other sites More sharing options...
Sheefa Posted January 16, 2007 Author Share Posted January 16, 2007 Right, I'm getting annoyed now. If people want it, payment is required, not just a "I'll take it" and one month later, no payment. Collection is preferred, but it is all packaged up ready to go, but is bloody heavy and large. PM me if interested. Looking for £100. See CWs comments above on condition. Greg Link to comment Share on other sites More sharing options...
Guest Bainesy36 Posted January 16, 2007 Share Posted January 16, 2007 Hi there Greg. Thought you were going to let me know if it was still available? Ah well, I'll let you off as you've got a lot to deal with at the mo'. Hope Emily is improving every day mate! Anyway, back to the thread. I'll take it. Pm on it's way re payment. Nige. Link to comment Share on other sites More sharing options...
Sheefa Posted January 16, 2007 Author Share Posted January 16, 2007 Thanks Bains and sorry matey, it was sold until today when I thought I can't be arsed sending PMs etc to previous seller and not getting anywhere with payment! Hence, back up for sale and you have first dibbs. Greg Link to comment Share on other sites More sharing options...
Sheefa Posted January 16, 2007 Author Share Posted January 16, 2007 Sold .....to the reliable man above! Thanks Bainesy. Greg Link to comment Share on other sites More sharing options...
Recommended Posts