Sheefa Posted December 17, 2006 Share Posted December 17, 2006 Hello all, What a truly magical moment this is! After 10 weeks or more of my Supe being out of action since the crash in August she's finally back on my drive under wraps! She's been at Chris Wilsons having plenty of work done over the last few months including new Radiator, new FMIC, new cambelt, crank damper, RLTC fitted, new turbo solenoids etc etc. I believe Chris' comments were "That's probably the worst car I've worked on!" LOL. Everything went wrong that could of. Major alarm problems, stupid radiator cap, RLTC playing up and god knows what else. Anyways, Chris you've done a magical job and the drive home really was the BEST EVER! A big thank you to you and also to Pete who have both worled tirelessly on her. :) Appreciate all you've done. Trust me, if you drove her now you'd see why I take it to Chris all the time. There were 4 other Supes there so they'll e getting some good attention too no doubt. Now, let's hope that's the end of my bad luck run! Just need to sort out my horn, my HID light problems and configure the RLTC a little more. Cheers all! Greg Quote Link to comment Share on other sites More sharing options...
Nic Posted December 17, 2006 Share Posted December 17, 2006 Congratulations Greg! Terminator (Phil) is the RLTC guru, drop him a line and I'm sure he'll be able to help. Quote Link to comment Share on other sites More sharing options...
Sheefa Posted December 17, 2006 Author Share Posted December 17, 2006 Thanks Nic. Yeah Pete and I are having the same problem as is Rich. Must be to do with this darn launch control on autos. Quote Link to comment Share on other sites More sharing options...
RobSheffield Posted December 17, 2006 Share Posted December 17, 2006 Good to hear Greg Quote Link to comment Share on other sites More sharing options...
SteveR Posted December 17, 2006 Share Posted December 17, 2006 Glad you've finally got her back. Now whatever you do, just leave it where it is so you can't have any more bad luck P.S. I pity your wallet! Quote Link to comment Share on other sites More sharing options...
Pete Posted December 17, 2006 Share Posted December 17, 2006 A big thank you to you and also to Pete who have both worled tirelessly on her. :) I didn't do much other than act as a sounding board and supply cables, laptops, swap the RLTC units over, wiggle wires, swear and mutter. Glad you've finally been reunited with it. Quote Link to comment Share on other sites More sharing options...
Sheefa Posted December 17, 2006 Author Share Posted December 17, 2006 Thanks guys, and you certainly helped Pete! At least through my car, you also discovered a fault with said RLTC in yours Quote Link to comment Share on other sites More sharing options...
Shaun. Posted December 17, 2006 Share Posted December 17, 2006 Welcome "back" mate Shaun. Quote Link to comment Share on other sites More sharing options...
Pete Posted December 17, 2006 Share Posted December 17, 2006 Thanks guys, and you certainly helped Pete! At least through my car, you also discovered a fault with said RLTC in yours I was always aware of it but only ever use it in Dry or Wet settings. I never fart about with the others so it never really worried me. It cut out on me about 6 months ago when I was playing with it. Quote Link to comment Share on other sites More sharing options...
TrickTT Posted December 18, 2006 Share Posted December 18, 2006 Nice one Greg, I've never seen your car in the flesh yet. We'll have to have a new year meet so I can have a good look I've also fixed the problem with my RLTC by turning the launch rev limit up to 4000 rpm using the digi adjuster:thumbs: Quote Link to comment Share on other sites More sharing options...
Guru Posted December 18, 2006 Share Posted December 18, 2006 Thank god Greg! Bout time you let him go so he can do some bits to mine! Quote Link to comment Share on other sites More sharing options...
colsoop Posted December 18, 2006 Share Posted December 18, 2006 Nice one Greg. Please Please Please be careful ! Quote Link to comment Share on other sites More sharing options...
imi Posted December 18, 2006 Share Posted December 18, 2006 Glad you got everything sorted. I am using one of Phil (Terminators) DAR files and am very happy with it. Quote Link to comment Share on other sites More sharing options...
Sheefa Posted December 18, 2006 Author Share Posted December 18, 2006 Ha ha, thanks again guys, much appreciated! Pete and TrickTT - Glad you sorted the problem out. I'll have a tinker with mine once I get the lead through. Look forward to meeting up for sure Rich. Guru - Nice. Sorry for taking up all of Chris' time mate Which car was yours. the Red that had the bonnet missing and was left on bricks? Only joking, it does look lovely . Colin - Thanks buddy, I certainly will be careful. On the way back I drove like a sissie except on the Motorway. So much so, that my mates 1.6 ltr Diesel Fiesta was gaining distance! I'll be giving you a shout for some bling in March !! Imi - Thanks too. I'm going to get Matt to have a look and go from there in case the above trick that worked for Pete and Rich doesn't work. Cheers! Greg Quote Link to comment Share on other sites More sharing options...
Pete Posted December 18, 2006 Share Posted December 18, 2006 Imi - Thanks too. I'm going to get Matt to have a look and go from there in case the above trick that worked for Pete and Rich doesn't work. It will work. Quote Link to comment Share on other sites More sharing options...
Shaun. Posted December 18, 2006 Share Posted December 18, 2006 Pete and TrickTT - Glad you sorted the problem out Greg *Cough* Shaun. Quote Link to comment Share on other sites More sharing options...
Sheefa Posted December 18, 2006 Author Share Posted December 18, 2006 Ha, ha - Sorry Shaun, forgot where the original 'fix' came from!! Thanks a bundle mate, love you sweetpea. xxx Quote Link to comment Share on other sites More sharing options...
Shaun. Posted December 18, 2006 Share Posted December 18, 2006 -- X -- (in a Man type and non gay way) Shaun. Quote Link to comment Share on other sites More sharing options...
Sheefa Posted December 18, 2006 Author Share Posted December 18, 2006 Dito mate, Dito! Greg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.