Mas Posted December 12, 2006 Share Posted December 12, 2006 Hi fellas, I had my new wheels and new Teins fitted last week and to be honest still not sure if its been set to lower height as I wanted?!! I can see other cars with the same set up (18's wheels and SS teins) that sit very nicely but as you can see from the pic my car still up in the air!!! any idea how to check the height level and how much SS teins usually drop the car from standard height? cheers guys Link to comment Share on other sites More sharing options...
Nic Posted December 13, 2006 Share Posted December 13, 2006 This is the adjustment range of the Tein Super Streets compared to stock. Ft:-45 to +34mm Rr:-45 to +8mm Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted December 13, 2006 Share Posted December 13, 2006 Looks about right to me, if you lower it more your going to have problems with inclines and speed bumps, mine sits about the same on aftermarket springs and shocks, and i have trouble. Link to comment Share on other sites More sharing options...
TrickTT Posted December 13, 2006 Share Posted December 13, 2006 Rear looks ok to me. I'd drop the front by 5mm if i where you. Jack the car up on the chassis, then using the supplied c-spanners, loosen the spring collars and lower them 5mm and retighten. My teins hardly moved at all after they where fitted, so you shouldn't have to readjust them again. Link to comment Share on other sites More sharing options...
letmeshowyou Posted December 13, 2006 Share Posted December 13, 2006 looks about right to me too - I asked for mine to be set as low as possible when they first went on, but had to wind it back up a fair way after only a few days - it was a nightmare on bumpy roads! Link to comment Share on other sites More sharing options...
Nic Posted December 13, 2006 Share Posted December 13, 2006 If anything Mas the rear looks a little low, having the rear too low will mean there is not enough suspension travel to keep the rears gripping when accelarating hard. Link to comment Share on other sites More sharing options...
iain2010 Posted December 13, 2006 Share Posted December 13, 2006 I got told traction becomes a problem when the back is too low Link to comment Share on other sites More sharing options...
DamanC Posted December 13, 2006 Share Posted December 13, 2006 Your rear looks a tad low, putting more focus on the front. You could go down another 5mm but its the back thats got to come up imo. My Flex setup http://img399.imageshack.us/img399/9514/imgp1119tm0.jpg Link to comment Share on other sites More sharing options...
Mas Posted December 13, 2006 Author Share Posted December 13, 2006 Thanks guys, Im kinda happy with the rear TBH as it doesnt rub even though I have 285's (didnt need to roll/shave arches either)just not too sure about the front sticking too high like that which I think looks ugly really. will get them checked again in weekend. thanks to all once again Link to comment Share on other sites More sharing options...
Mas Posted December 13, 2006 Author Share Posted December 13, 2006 This is the adjustment range of the Tein Super Streets compared to stock. Ft:-45 to +34mm Rr:-45 to +8mm Thanks Nic as always very informative, I'd love to know how to work these numbers out though dum question I know Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 13, 2006 Share Posted December 13, 2006 I'd say it's way too low at the back and could do with a bit more height on the front too. But I set up for handling and traction, not looks... Link to comment Share on other sites More sharing options...
Nic Posted December 13, 2006 Share Posted December 13, 2006 Thanks Nic as always very informative, I'd love to know how to work these numbers out though dum question I know Basically these are the maximum drop and maximum height the coilovers can be adjusted compared to stock ride heights. ie. Front can be lowered -45mm, or raised +34mm compared to stock ride height. Rears can be lowered -45mm, or raised +8mm compared to stock ride height. Link to comment Share on other sites More sharing options...
Mas Posted December 13, 2006 Author Share Posted December 13, 2006 I'd say it's way too low at the back and could do with a bit more height on the front too. But I set up for handling and traction, not looks... Basically these are the maximum drop and maximum height the coilovers can be adjusted compared to stock ride heights. ie. Front can be lowered -45mm, or raised +34mm compared to stock ride height. Rears can be lowered -45mm, or raised +8mm compared to stock ride height. Ok I do as both of you guys said then, will raise the back abit more and try to forget about the ugly looking front thanks guys Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now