boromfccup Posted December 8, 2006 Share Posted December 8, 2006 im thinking about going bpu could anyone tell me if you still maintain the stock reliability Quote Link to comment Share on other sites More sharing options...
Matt Harwood Posted December 8, 2006 Share Posted December 8, 2006 Yes. Providing it's done properly Quote Link to comment Share on other sites More sharing options...
Jake Posted December 8, 2006 Share Posted December 8, 2006 No. Quote Link to comment Share on other sites More sharing options...
Rayman Posted December 8, 2006 Share Posted December 8, 2006 eh please expand jake? Quote Link to comment Share on other sites More sharing options...
jayssupra Posted December 8, 2006 Share Posted December 8, 2006 Yes you do Quote Link to comment Share on other sites More sharing options...
JamesG Posted December 8, 2006 Share Posted December 8, 2006 I don't see how you can expect the same level of reliability when you're pushing the turbos, engine, drivetrain and brakes harder! Nevertheless, my BPU supra has been faultless for over 4 years. But I've done less than 30,000 miles in it, and I don't thrash it everyday Quote Link to comment Share on other sites More sharing options...
Homer Posted December 8, 2006 Share Posted December 8, 2006 As Jake said - no you won't retain the same reliability. BPU will put much more stress on the entire drive train which causes additional wear on turbo's, gearbox, clutch, diff, brakes, etc. Therefore parts will wear quicker and potentially fail where they may not have with the car left stock. However, many here have had BPU for years with few if any issues. Here's a thread from a while ago which lists a few members experiences: http://www.mkivsupra.net/vbb/showthread.php?t=74903 Quote Link to comment Share on other sites More sharing options...
Steviekid Posted December 8, 2006 Share Posted December 8, 2006 I don't see how you can expect the same level of reliability when you're pushing the turbos harder! Having said that, it seems plenty of turbos go at standard boost too so it's a bit of a lottery. Quote Link to comment Share on other sites More sharing options...
wkdtime Posted December 8, 2006 Share Posted December 8, 2006 The car still maintains a very high level of reliability as long as it's maintained in the same way, a friend of mine has been BPU 1.2Bar for 50,000 miles with no issues what so ever with the engine or transmission. Quote Link to comment Share on other sites More sharing options...
GT5500 Posted December 8, 2006 Share Posted December 8, 2006 I don't see how you can expect the same level of reliability when you're pushing the turbos, engine, drivetrain and brakes harder! Nevertheless, my BPU supra has been faultless for over 4 years. But I've done less than 30,000 miles in it, and I don't thrash it everyday Not all BPU will reduce reliabilty you have to remember any car has a lot of restrictions built into it to make it comply with emissions and noise regulations. A lot of BPU will just remove these restrictions and let the engine perform as it was designed to do so it shouldn't be much less reliable. The engine was designed to work without these restrictions so it should work without them, what you hae to consider is that most cars with BPU will be driven much harder. I am only talking about exhaust and inlet restrictions though once you start fettling with the boost the turbos and engine are going to start getting hammered. Quote Link to comment Share on other sites More sharing options...
Muffleman Posted December 8, 2006 Share Posted December 8, 2006 Plus when BPU'd, you're only really going to exceed stock boost when you feel like it, not all the time. Quote Link to comment Share on other sites More sharing options...
JohnA Posted December 9, 2006 Share Posted December 9, 2006 im thinking about going bpu could anyone tell me if you still maintain the stock reliability Of course not, do think you'll get 80odd extra bhp in exchange for nothing? If done properly then you'll avoid engine damage and additional loads that exceed Toyota's generous safety margins. But the turbos will be spinning too fast under full boost. Their life will be seriously reduced once a FCD is fitted and you regularly go over 1 bar. Stick to half-way-BPU and you retain stock reliability;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.