Fitting Polished TT pipe work.

[DamanC]

Cheers Alf, ive been hammering the search button and i think i can say the more pronounced flutter is normal

 

Im aware of the error 42, ive just never got round to fixing it.......yet! Its the concern of holding 4k for 5 seconds with the engine management commin on. I should add that on WOT or a gradual increase in RPM in D or 2 shows no engine management light

[SupraAyf]

Its the concern of holding 4k for 5 seconds with the engine management commin on. I should add that on WOT or a gradual increase in RPM in D or 2 shows no engine management light

 

Sounds like a similiar problem that Dave was having. Here is his rectification thread. Is sounds the same IMO:

 

EDIT: The quote I posted was shite (now removed from this thread), as it appears the guy was inputing twin signals in to one wire - not good! The answer is contained within this thread somewhere Daman - let me read it a bit more mucka

 

http://www.mkivsupra.net/vbb/showthread.php?t=72588&highlight=code

[DamanC]

Ah yes i remembered that, i wasnt aware that it was comming on at the 4k mark for others either. I can breathe a sigh of relief and i think i can now safely say project bling pipes and induction kit was a success

 

Thanks Alf and everyone else, remind me at the next show that i owe you all a drink

[SupraAyf]

Daman,

 

It sounds as if posts 67 and 74 of the link below should resolve the issue.

 

http://www.mkivsupra.net/vbb/showthread.php?t=72588&highlight=code

 

The possibilities are:

 

1. Reset ECU to ensure the issue is not just a temporary bug!

2. Reinstall your speed de-limiter to make sure that all connections have been done correctly.

3. Concuct the procedures as per post 67 & 74 mate - not hard!

 

cheers mucka:)

[DamanC]

Thanks Alf, ill have a crack when i get some time.

 

For anyone remotely interested, my last couple of days effort;

 

http://img151.imageshack.us/img151/8682/imgp1230sizemd5.jpg

[Bob]

Good work, Daman

[SupraAyf]

For anyone remotely interested, my last couple of days effort

 

Well done Daman - looks great indeed mate. You do realise this is just the start of things to come. You won't be happy until everything is 'blinged-up' now!!

 

Good effort Sir;)

[Kev.O]

Great job Daman well done

[silvershark44]

Yeah Looks really good, well done there mate

[Ian Ian]

Looking good there daman its the start of a slippery slope there you will be crying "more bling " more bling" before long LOL

 

Good job there well done just get the induction done next so i can see how thats done too LOL

 

Cheers

Ian

[mr lover]

welcome to the slippery slope

[DamanC]

Ta very much fellas

 

Christ on a bike Gary, yours is rather shiney Tis very nice

 

Yours too Andrew, tell me something, who makes your splitter?

 

Next Bling will be the FMIC pipes, but for now i think id quite like a bling pipe for the induction pipe.......do they do them?

[SupraAyf]

Ta very much fellas

 

Yours too Andrew, tell me something, who makes your splitter?

 

Damam, it's a Bomex Type-2 splitter mate. It looks very good on the car IMHO and would be great for blending too. It is a little lower than what you can see in my gargage pic as my drive arches away from the car; making it look higher than what it is!

 

Next Bling will be the FMIC pipes, but for now i think id quite like a bling pipe for the induction pipe.......do they do them?

 

I'm the same as the plastic pipe looks crap. Mine is going in to the local designer this week to be 'spray chromed'. This means that I get an exact fit and it looks 100% bling too - better than any ali-chromed pipe IMO. I'll send a pic your way when its done yeh!

[MR.B]

Looks superb buddy well done You're on the slippery slope now dude