cowboy bebop Posted June 29, 2009 Share Posted June 29, 2009 It makes me smile everyday. Eric Link to comment Share on other sites More sharing options...
chris2o2 Posted June 29, 2009 Share Posted June 29, 2009 Wow. Just Wow. Link to comment Share on other sites More sharing options...
cowboy bebop Posted June 29, 2009 Share Posted June 29, 2009 You guys should feel the response this thing has on the street. It feels pulls like a freight train, and sounds different from any other Supra out there. It's quiet at idle, to where two people can hold a normal conversation, and raw at full throttle. Eric Link to comment Share on other sites More sharing options...
EdMorris Posted June 29, 2009 Share Posted June 29, 2009 It does look sexy Eric. I love the symmetry of the setup and the hidden wires etc. Btw, your oil filler neck is much shorter than mine. I was looking at that earlier funnily enough and wondering if it will clear the bonnet. Now I've seen yours I may get it cut down anyway to be sure. Link to comment Share on other sites More sharing options...
cowboy bebop Posted June 29, 2009 Share Posted June 29, 2009 Hi Ed, The stock height neck will clear, but it's close. At the last minute, I cut mine down to a shorty just so it had a more contemporary look. Thanks!! Eric Link to comment Share on other sites More sharing options...
Dave_SZ-R Posted June 29, 2009 Share Posted June 29, 2009 Hi cowboy bebop, I do believe that is my favourite engine bay of all time, just stunning. Where about in the States are you, (sorry if this has been mentioned already!) I go over there every year- best holiday in the world bar none! Link to comment Share on other sites More sharing options...
Kirk Posted June 29, 2009 Share Posted June 29, 2009 more vids eric mor vids! Link to comment Share on other sites More sharing options...
caseys Posted June 30, 2009 Share Posted June 30, 2009 Hey Eric, I keep coming back to this thread and just sit there in pure awe/envy. How much is one of these blocks to ship over to the UK? A spec I could just drop in with all pumps, belts, ancilliaries etc bar turbos. Please PM me a price inc delivery and also a $ price so I can work out where my delta would be with the exchange rate to be able to buy one of these blocks. I remember Ed has a thread, but I would assume prices have fluctuated a bit. Link to comment Share on other sites More sharing options...
EdMorris Posted July 1, 2009 Share Posted July 1, 2009 Hey Eric, I keep coming back to this thread and just sit there in pure awe/envy. How much is one of these blocks to ship over to the UK? A spec I could just drop in with all pumps, belts, ancilliaries etc bar turbos. Please PM me a price inc delivery and also a $ price so I can work out where my delta would be with the exchange rate to be able to buy one of these blocks. I remember Ed has a thread, but I would assume prices have fluctuated a bit. If you go ahead with one of these, let me know and I can help you out with the niggly bits. I've learned loads doing it myself. You won't regret it once you see it sitting pretty in the engine bay. Link to comment Share on other sites More sharing options...
cowboy bebop Posted July 2, 2009 Share Posted July 2, 2009 Ed it was good taking with you this morning, hopefully what we talked about will work well. Thanks again! Eric Link to comment Share on other sites More sharing options...
EdMorris Posted July 2, 2009 Share Posted July 2, 2009 Indeed, nice chatting. I think I'm gonna get a plate made up anyway as I don't like how much tension is on the gearbox rubber. If you check my build thread I'm just about to upload some pics to explain things. Cheers. Link to comment Share on other sites More sharing options...
cowboy bebop Posted July 2, 2009 Share Posted July 2, 2009 I believe the engine bay is done. To keep the heat in check, I've wrapped the whole turbo kit. It helps out a ton, and also I've installed these snazzy scrazzy heat shields for the turbo housing. Link to comment Share on other sites More sharing options...
MarkR Posted July 3, 2009 Share Posted July 3, 2009 Looks better with those shields! Link to comment Share on other sites More sharing options...
cowboy bebop Posted July 3, 2009 Share Posted July 3, 2009 (edited) I'm liking them as well I'm about to take the car out for a spin this moring to stretch it's legs a little, so we'll see how the shields work. Edit: The shields work great as well as the heat wrapping. After driving in town for 30 minutes, and doing a couple of pulls, I parked the car. The shields were warm as expected, but I coupld hold my finger to them. Edited July 3, 2009 by cowboy bebop (see edit history) Link to comment Share on other sites More sharing options...
cowboy bebop Posted September 29, 2009 Share Posted September 29, 2009 A short driving video: Link to comment Share on other sites More sharing options...
JamieP Posted September 29, 2009 Share Posted September 29, 2009 I see why you guys like big turbos, just look at them roads, big, wide and not a bend in sight:D Link to comment Share on other sites More sharing options...
Kev.O Posted September 29, 2009 Share Posted September 29, 2009 Looking forward to seeing part two Sounds great Link to comment Share on other sites More sharing options...
cowboy bebop Posted September 29, 2009 Share Posted September 29, 2009 Yeah, I'm no television presenter, so keeping that in mind the car is the star and not me. I wish the batteries wouldn't have gone out as I did the 2nd gear pull. Still fun thoguh. Eric Link to comment Share on other sites More sharing options...
Guigsy Posted September 29, 2009 Share Posted September 29, 2009 arg. such an annoying place for the vid to end. lol i sware that little road looks familiar to me. but then... a lot of the roads in florida look similar to me Link to comment Share on other sites More sharing options...
cowboy bebop Posted September 29, 2009 Share Posted September 29, 2009 I know, I was pissed that the batteries died out right where it did. But still it should give a good idea of what it's like to drive the car. Eric Link to comment Share on other sites More sharing options...
Kirk Posted September 29, 2009 Share Posted September 29, 2009 (edited) that thing sounds awesome so have you got final power figures yet or are you still in the process of tuning on the dyno?? Edited September 29, 2009 by Kirk (see edit history) Link to comment Share on other sites More sharing options...
Ricky49 Posted September 29, 2009 Share Posted September 29, 2009 Awesome!!!!!!!!!! Link to comment Share on other sites More sharing options...
cowboy bebop Posted September 29, 2009 Share Posted September 29, 2009 Nope, no power figures. Just good old fashioned hauling ass Eric Link to comment Share on other sites More sharing options...
Kirk Posted September 29, 2009 Share Posted September 29, 2009 roll on part 2!! :D Link to comment Share on other sites More sharing options...
Porky1978 Posted September 29, 2009 Share Posted September 29, 2009 I medically NEEEEEEEEED one of those engines!! Dont have a car to put it in YET but even so...... Hats off toy you buddy, super neat install and driveability too. Excellent work. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now