jongilly Posted April 19, 2020 Share Posted April 19, 2020 What you need go do, is blast the nut with some heat, bottle of mapgas will do, for 30secs.. then get your self a milwauke impact wrench, hi torque, from bigredtools in preston, other suppliers available for £200 plus battery, these guns will rattle off at 1400lb/ft, you will probably have to remove raditor to get it in Quote Link to comment Share on other sites More sharing options...
Keeperlit Posted July 11, 2020 Share Posted July 11, 2020 What you need go do, is blast the nut with some heat, bottle of mapgas will do, for 30secs.. then get your self a milwauke impact wrench, hi torque, from bigredtools in preston, other suppliers available for £200 plus battery, these guns will rattle off at 1400lb/ft, you will probably have to remove raditor to get it in Having tried the fan belt locking trick, starter bump method unsuccessfully on my 93 NA auto which last had a cambelt change in 2001, I managed to borrow a Milwaukee 1898 Nm impact gun which STILL took a good while at maximum setting, which was like holding on to a jack hammer, ouch! Thank God it's done now Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted July 11, 2020 Share Posted July 11, 2020 Ive done a few now, and needed nothing more than the Toyota locking tool, a 22mm impact socket, and a 3ft breaker bar Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.