deep sounds

[supratony]

hi i've just bought a twin 10inch sub enclosure with subs and need to get it wired up. 2 problems one is how do i get the power cable through the bulk head to the battery and the second is how do i get the stereo out. jap spec 1994 n/a

[Jezz]

hi i've just bought a twin 10inch sub enclosure with subs and need to get it wired up. 2 problems one is how do i get the power cable through the bulk head to the battery and the second is how do i get the stereo out. jap spec 1994 n/a

 

Stereo is easy. Remove the main dash panel with the heater controls in, then you'l see 4 screws holding the stereo cage in. If your cars auto there's a grommit where the clutch pedal would go through the bulk head. Use this for your cables.

[Ian W]

no idea about the power cable i'm afraid mate but the stereo removal is easy enough.

 

unfortunatley you have to take the facia panels off the dash, starting at the ash tray and working your way forward. there's a 'how to do' on here somewhere.

 

not difficult at all just take your time.

[Alan999]

To get the power cabel through look at the left hand side of the bulk head theres a washer or something with some other stuff running through and i got my cable throught the bulk head there.( Ill try to get a pic on for you tomorrow ) I used some big cable to so put abit of silicone over the washer after just to seal it up.

[supratony]

thanks for your help guys i would appreciate that pic alan thanks again