Supragaz Posted November 2, 2006 Share Posted November 2, 2006 Mine was an auto and Emin did the leds for the auto surround (man/overdrive buttons) Link to comment Share on other sites More sharing options...
rovervi Posted November 2, 2006 Share Posted November 2, 2006 Just for information Metal monkey do the LEDs with the resistor already attached i used them to just make the buttons light up blue Link to comment Share on other sites More sharing options...
Underworld Posted November 2, 2006 Author Share Posted November 2, 2006 Oh. Quick tip, if you are doing this DONT buy the el wire crap off ebay lol. I plugged it into my cigarette lighter and it started to catch on fire!!. Doubt they are going to refund me either.... Link to comment Share on other sites More sharing options...
Kieran Posted November 2, 2006 Share Posted November 2, 2006 Oh. Quick tip, if you are doing this DONT buy the el wire crap off ebay lol. I plugged it into my cigarette lighter and it started to catch on fire!!. Doubt they are going to refund me either.... I used the stuff from ebay and it was fine, pain in the arse to fit it behind the buttons though. Link to comment Share on other sites More sharing options...
Underworld Posted November 2, 2006 Author Share Posted November 2, 2006 Which one did you use? I got http://cgi.ebay.co.uk/BLUE-NEON-TUBE-WIRE-EL-WIRE-LED-SUBS-AMP-6X9s-DASH_W0QQitemZ140038587077QQihZ004QQcategoryZ72237QQcmdZViewItem It seemed the wiring in the bit that plugs into the cigarette lighter was crap. Link to comment Share on other sites More sharing options...
rovervi Posted November 2, 2006 Share Posted November 2, 2006 Which one did you use? I got http://cgi.ebay.co.uk/BLUE-NEON-TUBE-WIRE-EL-WIRE-LED-SUBS-AMP-6X9s-DASH_W0QQitemZ140038587077QQihZ004QQcategoryZ72237QQcmdZViewItem It seemed the wiring in the bit that plugs into the cigarette lighter was crap. so what do you use this for ? Link to comment Share on other sites More sharing options...
Kieran Posted November 2, 2006 Share Posted November 2, 2006 Which one did you use? I got http://cgi.ebay.co.uk/BLUE-NEON-TUBE-WIRE-EL-WIRE-LED-SUBS-AMP-6X9s-DASH_W0QQitemZ140038587077QQihZ004QQcategoryZ72237QQcmdZViewItem It seemed the wiring in the bit that plugs into the cigarette lighter was crap. Can't find it on there at the minute, it was a while ago I did mine. The stuff i got didn't plug into the lighter, there were just two wires which I tapped into the wires for the ashtray light. Link to comment Share on other sites More sharing options...
Kieran Posted November 2, 2006 Share Posted November 2, 2006 so what do you use this for ? Backlighting the buttons on the heater control. Link to comment Share on other sites More sharing options...
Underworld Posted November 2, 2006 Author Share Posted November 2, 2006 Yea i just need an invertor thing that wont blow up on me! Link to comment Share on other sites More sharing options...
supra steveo Posted November 2, 2006 Share Posted November 2, 2006 what is mcd? and i think that might of been the different type of LEDs i was thinking of Link to comment Share on other sites More sharing options...
supra steveo Posted November 2, 2006 Share Posted November 2, 2006 and if it is what ones are or did you use? Link to comment Share on other sites More sharing options...
supra steveo Posted November 2, 2006 Share Posted November 2, 2006 ah right, mcd is the Luminous Intensity if i am right what ones should be used ? Link to comment Share on other sites More sharing options...
Kieran Posted November 2, 2006 Share Posted November 2, 2006 what is mcd? and i think that might of been the different type of LEDs i was thinking of MCD means millicandelas and is the how brightness of the LED is measured. When I did mine, I got the resistors and diodes etc from Maplin and the LEDs from ebay and followed the guide here http://www.internetwork.org.uk/led/led.htm Link to comment Share on other sites More sharing options...
Kieran Posted November 2, 2006 Share Posted November 2, 2006 ah right, mcd is the Luminous Intensity if i am right what ones should be used ? Too slow! Link to comment Share on other sites More sharing options...
heckler Posted November 2, 2006 Share Posted November 2, 2006 there is another way of doing the heater buttons - using LED's and prototyping board, very involved, but the results are much better. I do all my heater controls like this now. I also had too many problems with the EL wire invertors going "pop" Link to comment Share on other sites More sharing options...
Underworld Posted November 2, 2006 Author Share Posted November 2, 2006 Yea not cool. Oh well ive ordered mine from the propper people, hopefully that will work! The last thing I wanted was for my car to randomly set on fire or anything. Would be cool if you updated the guide with your new way of using leds! Do you make a long thin bit of board to back onto the buttons? Link to comment Share on other sites More sharing options...
heckler Posted November 2, 2006 Share Posted November 2, 2006 Yea not cool. Oh well ive ordered mine from the propper people, hopefully that will work! The last thing I wanted was for my car to randomly set on fire or anything. Would be cool if you updated the guide with your new way of using leds! Do you make a long thin bit of board to back onto the buttons? yeah, pretty much. I'll get round to updating the site early next year now, as I'm off to afghanistan on monday :D Link to comment Share on other sites More sharing options...
Nic Posted November 2, 2006 Share Posted November 2, 2006 There is a big thread about dash conversions here, with lots of useful info: http://www.supraforums.com.au/forum/showthread.php?t=7936 Link to comment Share on other sites More sharing options...
Steviekid Posted November 2, 2006 Share Posted November 2, 2006 There was a thread a while back about using these as a direct replacement for the stock backlight clear bulbs with that green rubber cover on them. Has anyone tried them or know if they'll work? Link to comment Share on other sites More sharing options...
Underworld Posted November 2, 2006 Author Share Posted November 2, 2006 Yea i just got back from work and had a quick look. I was wondering why dont we just replace the green rubbery ones with blue ones. Then figure out something for the other knob. Link to comment Share on other sites More sharing options...
Underworld Posted November 2, 2006 Author Share Posted November 2, 2006 Boo do a quick guide heckler or just tell me Link to comment Share on other sites More sharing options...
supra steveo Posted November 2, 2006 Share Posted November 2, 2006 ah heckler!! i wasnt so sure if you were still about or already over there but i bet your lssa day count is going through the roof i might just wait to see this new idea and just replace all the other little leds before doing the heater control part Link to comment Share on other sites More sharing options...
heckler Posted November 2, 2006 Share Posted November 2, 2006 ah heckler!! i wasnt so sure if you were still about or already over there but i bet your lssa day count is going through the roof i might just wait to see this new idea and just replace all the other little leds before doing the heater control part 477 and counting Link to comment Share on other sites More sharing options...
supra steveo Posted November 2, 2006 Share Posted November 2, 2006 477 and counting cool i should have 1000s but thanks to this pay 2000 shite ive only got about 360 or something, because of the old system i had to do 3 yrs before i got any lssa days Link to comment Share on other sites More sharing options...
supra steveo Posted November 2, 2006 Share Posted November 2, 2006 BTW sorry about the wee hi-jack Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now