razza Posted October 29, 2006 Share Posted October 29, 2006 I was just finishing cleaning the car, went to pull the cigarette adaptor on the hoover out, and it pulled the whole bloody thing out. The wires behind it with the 2 white plugs on aren't long enough to pull through the hole (were very taught and didn't want to yank anything out), and therefore I can't connect it back up. Is this an easy job, or is it a take the dash to pieces? If it is then I'll go without the cigarette lighter and pop down to the local garage next time I need to hoover it. Quote Link to comment Share on other sites More sharing options...
ECK Posted October 29, 2006 Share Posted October 29, 2006 yea mate its a dodle unscrew the dash lid then the rest pretty much pops off with clips holding em on give it a try!! Quote Link to comment Share on other sites More sharing options...
Nic Posted October 30, 2006 Share Posted October 30, 2006 Very easy job to remove the dash panels when you know how. See how to guide here courtesy of Heckler http://www.internetwork.org.uk/Dash%20Conversion/dashrem.htm Quote Link to comment Share on other sites More sharing options...
Dr_Doom Posted October 30, 2006 Share Posted October 30, 2006 Yeah, removing the dash panels is really easy.... putting the cigarette lighter back in is like doing a rubik's cube! Lots of parts twisting and locking in place! mine still pulls out every now and then if i'm not carefull.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.