Homer Posted October 21, 2006 Share Posted October 21, 2006 I'm following the wiring guide on mohd parts: http://www.mohdparts.com/emanage/install/2jz-gte_install/index.html#(4)%20-%20Installing%20the%20Ignition%20Wires%20into%20the%20E-manage%20Ignition%20Harness But it appears there is a step missing, it doesn't explain what to do with the Yellow, Purple and Light blue wires on the main harness. (see pic) Any ideas where these go? Also, on my harness the yellow/black - yellow/white and pink/white - purple/white are wired the opposite way round to those on the mohdparts page. Just wondered if anyone else seen that before? Quote Link to comment Share on other sites More sharing options...
terribleturner Posted October 21, 2006 Share Posted October 21, 2006 I'll have to check but im sure they are onees you just tidy away. They are part of the injector one arn't they?? Quote Link to comment Share on other sites More sharing options...
Graham S Posted October 21, 2006 Share Posted October 21, 2006 check with Gav mate (phoenix) he has done it before and should know what goes where.. Quote Link to comment Share on other sites More sharing options...
Homer Posted October 21, 2006 Author Share Posted October 21, 2006 I'll have to check but im sure they are onees you just tidy away. They are part of the injector one arn't they?? Thanks mate, yes, they're on the same plug as the injector wires. Quote Link to comment Share on other sites More sharing options...
terribleturner Posted October 21, 2006 Share Posted October 21, 2006 I'll double check in the morning when i begin playing with it again but am 99% sure at this point they are just tidied away. Quote Link to comment Share on other sites More sharing options...
Homer Posted October 21, 2006 Author Share Posted October 21, 2006 I know there's two wires that are not used (White/red stipe & Green red stripe). This emanage come from Paul Whiffins Supra and the 3 mentioned in the first post all have plugs on them. Would appeciate it if you could take a look mate Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 21, 2006 Share Posted October 21, 2006 The Lt blue and the purple are for Karmen/vortex AFM and the yellow is for 2nd AFM input ie Skyline, White/red stripe & Green red stripe are for sub injector output. Quote Link to comment Share on other sites More sharing options...
terribleturner Posted October 21, 2006 Share Posted October 21, 2006 Good work that man Quote Link to comment Share on other sites More sharing options...
Homer Posted October 22, 2006 Author Share Posted October 22, 2006 Thanks guys, had a look at James' today and confirmed the 3 wires are not needed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.