Guest MacNastie Posted October 18, 2006 Share Posted October 18, 2006 hi! i know im new but i need some help! on the mkiv o.c site under tech articales, thay said to buy the MR2 Gready bcc part #1550006. for the supra,but according to Gready this part number is for a mazda 1993-1996 rx-7! does any one know the right one? also if i fit it, will i put the tt's at risk? Quote Link to comment Share on other sites More sharing options...
Jake Posted October 18, 2006 Share Posted October 18, 2006 What is the "mkiv o.c site"? If I was you mate I'd just get a VFCC from Thor Racing. It has advantages over the GReddy one and is proven to work with the MkIV Supra. Quote Link to comment Share on other sites More sharing options...
SupraAyf Posted October 18, 2006 Share Posted October 18, 2006 Mate, you can use it buddy. A Greddy BCC is just a voltage adjuster. All you need to do is take the back off and make sure the voltage output is reduced to the Supra Mkiv spec. (That's up to 4.3v or closest too (without going over) for a pre-facelift and closest to 4.1v for a facelift (again, without going over) Can't remember the wires and I’m away from the UK so can’t get my hands on my car but its only a 10 minute job and you won’t have to buy a new BCC. Refer to the US Supra Mkiv site and that will tell you in the spec section if I can recall! EDIT: You'll need something like a motorbike battery (12v) and a voltage checker and that's it. Once you take the back off the unit, you'll see a small dial that affects the voltage output. It will take 45 seconds to get the back off and a few minutes to get the voltage on track against the maximum margins stated above! Quote Link to comment Share on other sites More sharing options...
Guest MacNastie Posted October 19, 2006 Share Posted October 19, 2006 thanks! i dont have one yet but looking to buy! do you gentelmen know the max boost presure of a stock turbo Quote Link to comment Share on other sites More sharing options...
Nic Posted October 19, 2006 Share Posted October 19, 2006 thanks! i dont have one yet but looking to buy! do you gentelmen know the max boost presure of a stock turbo 1.2bar on stock J-spec turbos, I'd check the condition of your intercooler first though to make sure it is in good condition and able deal with the increased temp. You'll also need to fit a set of cooler grade plugs to avoid misfire at higher boost. Quote Link to comment Share on other sites More sharing options...
Darragh Posted October 19, 2006 Share Posted October 19, 2006 What is the "mkiv o.c site"? If I was you mate I'd just get a VFCC from Thor Racing. It has advantages over the GReddy one and is proven to work with the MkIV Supra. what he said the thor is a good bit of kit:cool: Quote Link to comment Share on other sites More sharing options...
Guest MacNastie Posted October 21, 2006 Share Posted October 21, 2006 thanks! just one more! dyno were in london is best for tune? i was thinking that place next to superchips in west london Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.