flukey-lukey Posted October 18, 2006 Share Posted October 18, 2006 Is there one on the site? Did a search, but didn't really come up with a 'how to' and I wanted to have a quick read through Thanks Link to comment Share on other sites More sharing options...
TrickTT Posted October 18, 2006 Share Posted October 18, 2006 Put a spanner on the bolt in the middle of the tensioner pulley, 14mm i think, and release the tension on the belt. While holding the tensioner away from the belt,remove it from the pulleys, then feed it out past the fan. Make sure you note which way it runs, although tbh the new one will only fit one way. Refitting is a removal of the removal procedure. Its a 10 minute job Link to comment Share on other sites More sharing options...
flukey-lukey Posted October 18, 2006 Author Share Posted October 18, 2006 Wicked mate, so even a novice can do this Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now