jazz1 Posted October 14, 2006 Share Posted October 14, 2006 Basically my front wipers worked fine and they still do but if i turn them "on" and then quickly turn them "off" they stop and dont automatically go down like they used too. The back one is fine as that goes down fine, what could be the problem? Link to comment Share on other sites More sharing options...
jazz1 Posted October 14, 2006 Author Share Posted October 14, 2006 Link to comment Share on other sites More sharing options...
Kranz Posted October 14, 2006 Share Posted October 14, 2006 There's a stop microswitch that's activated when the wiper is close to the stop position. So, when you start the wipers going then switch them off when the microswitch is still activated (and the blades are very close to the stop position) they do what they're supposed to and stop. If you do it when its half way across the screen whet does it do then?? Link to comment Share on other sites More sharing options...
jazz1 Posted October 14, 2006 Author Share Posted October 14, 2006 thats the thing its stops half way at the screen and does not go back down? Link to comment Share on other sites More sharing options...
Kranz Posted October 15, 2006 Share Posted October 15, 2006 Ah, errrr. I think the stop switch position is adjustable (someone help here??). Maybe its come loose?? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now