GLENN STONEHAM Posted September 14, 2006 Share Posted September 14, 2006 The joint between my 2nd decat pipe and main exhaust has blown for the 2nd time in 6 months using ex. paste.Last time it was done by Formular One & they now say I need a proper gasket which I agree with. The stock ones seem to be copper O rings which are not suitable between two flush flanges. Where can I get these or some gasket material to make one up (sheet lead?) It"s a 2.5in decat to stock exhaust. Anyone else had this problem? Quote Link to comment Share on other sites More sharing options...
keron Posted September 14, 2006 Share Posted September 14, 2006 i got mine from chris wilson on here (hks ones) Quote Link to comment Share on other sites More sharing options...
Bob Posted September 14, 2006 Share Posted September 14, 2006 Yup, contact Chris Wilson. It's £8.50 for a 3" but I think a lot cheaper for 2.5" Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.