CJ Posted September 13, 2006 Share Posted September 13, 2006 I have permission from the mods to see if there is any interest in a group buy for the 4" THICK FMIC made by XS-Power I have just bought one of these intercoolers and I also had one on the Blue Bullet. Greg also runs one on his circa 800hbhp Single car and we are /were both very satisfied with the performance. They are 600mm X 300mm X 100mm ( 4 INCHES THICK !!! ) and to my mind represent superb value for money. The cost of these delivered to your door is just £149.00. This is the FMIC only and does not include any hard pipe kit. If you are interested, please list your names below. Link to comment Share on other sites More sharing options...
squiffy Posted September 13, 2006 Share Posted September 13, 2006 is there a specific kit for it available? Link to comment Share on other sites More sharing options...
lui Posted September 13, 2006 Share Posted September 13, 2006 Damn good price there CJ & quality looks good too bet this is going to be a good group buy Link to comment Share on other sites More sharing options...
CJ Posted September 13, 2006 Author Share Posted September 13, 2006 is there a specific kit for it available? I am sure there is but am waiting for an answer on costs from the supplier. I know that Turbofit can supply and fit the hard pipe with this FMIC. Link to comment Share on other sites More sharing options...
Kranz Posted September 13, 2006 Share Posted September 13, 2006 There is a kit available with it on Ebay I think... I have one of these. It actually fits without having to move anything around (on my car at least). Link to comment Share on other sites More sharing options...
mr lover Posted September 13, 2006 Share Posted September 13, 2006 intrested Link to comment Share on other sites More sharing options...
CJ Posted September 13, 2006 Author Share Posted September 13, 2006 To get this moving we are going to need to order a goodly number - 10 at least. Please note that if paying by paypal, 4% charges will apply. Link to comment Share on other sites More sharing options...
CJ Posted September 13, 2006 Author Share Posted September 13, 2006 1. Mr. Lover Link to comment Share on other sites More sharing options...
spidermonkey Posted September 13, 2006 Share Posted September 13, 2006 could be interested Link to comment Share on other sites More sharing options...
CJ Posted September 13, 2006 Author Share Posted September 13, 2006 Fella's, I need 10 confirmed before this can begin. Might be's and could be's wont work I'm afraid. Link to comment Share on other sites More sharing options...
Bob Posted September 13, 2006 Share Posted September 13, 2006 1. Mr. Lover 2. Bob Link to comment Share on other sites More sharing options...
Class One Posted September 13, 2006 Share Posted September 13, 2006 Are you limiting this to ten? Need to run it by the finance and resources manager first. Link to comment Share on other sites More sharing options...
CJ Posted September 13, 2006 Author Share Posted September 13, 2006 Are you limiting this to ten? Need to run it by the finance and resources manager first. No - but to get the price 10 is the minimum order. Link to comment Share on other sites More sharing options...
dandan Posted September 13, 2006 Share Posted September 13, 2006 Will you be getting back to us regarding a hard pipe kit of any sort CJ (with silicon couplers, clips, replacement header tank even?) I'm sure the numbers would rocket up if it was some sort of complete kit... Link to comment Share on other sites More sharing options...
CJ Posted September 13, 2006 Author Share Posted September 13, 2006 Will you be getting back to us regarding a hard pipe kit of any sort CJ (with silicon couplers, clips, replacement header tank even?) I'm sure the numbers would rocket up if it was some sort of complete kit... I refer the honourable gentleman to post number 4 Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted September 13, 2006 Share Posted September 13, 2006 At that price i'm interested, what dia are the inlet and outlet CJ? Link to comment Share on other sites More sharing options...
CJ Posted September 13, 2006 Author Share Posted September 13, 2006 At that price i'm interested, what dia are the inlet and outlet CJ? Both are 3" Link to comment Share on other sites More sharing options...
Homer Posted September 13, 2006 Share Posted September 13, 2006 £149! Great price CJ! The hard pipe kit is going to cost more than that surely? Link to comment Share on other sites More sharing options...
Bob Posted September 13, 2006 Share Posted September 13, 2006 £149! Great price CJ! The hard pipe kit is going to cost more than that surely? £166 delievered HERE Link to comment Share on other sites More sharing options...
fat_controller Posted September 13, 2006 Share Posted September 13, 2006 not much of a group buy if u ask me, have another word with them. see link http://cgi.ebay.co.uk/24x12x4-INTERCOOLER-DSM-SUPRA-600x300x100-FRONT-MOUNT_W0QQitemZ8066673561QQihZ019QQcategoryZ72205QQcmdZViewItem tell me if link doesn't work Link to comment Share on other sites More sharing options...
CJ Posted September 13, 2006 Author Share Posted September 13, 2006 not much of a group buy if u ask me, have another word with them. see link http://cgi.ebay.co.uk/24x12x4-INTERCOOLER-DSM-SUPRA-600x300x100-FRONT-MOUNT_W0QQitemZ8066673561QQihZ019QQcategoryZ72205QQcmdZViewItem tell me if link doesn't work Well, thats the price I have been given. If you would like to negotiate with them then please go ahead my friend. Link to comment Share on other sites More sharing options...
fat_controller Posted September 13, 2006 Share Posted September 13, 2006 na, i'm going for the greddy spec v, i'm not sayin it's a bad price but it's the normal price. if they could do a deal with all hard pipes and pas cooler pipes then i would love 1 but fitting the greddy would be so much easier. Link to comment Share on other sites More sharing options...
Underworld Posted September 13, 2006 Share Posted September 13, 2006 Yarse im interested. Sounds a bit too cheap though? Considering a lot of other places are charging like 500 quid. Will this be a fair bit better than my stock smic? Id also need the pipes and stuff to plub it in. Link to comment Share on other sites More sharing options...
CJ Posted September 13, 2006 Author Share Posted September 13, 2006 Yarse im interested. Sounds a bit too cheap though? Considering a lot of other places are charging like 500 quid. Will this be a fair bit better than my stock smic? Id also need the pipes and stuff to plub it in. I can ask them to charge more if it makes you feel better If you have an old flakey SMIC, then this will perform better. If you had a new SMIC then I would think that would be better than this. Link to comment Share on other sites More sharing options...
Jezz Posted September 13, 2006 Share Posted September 13, 2006 I fitted my one of these in 2 minutes. And thats no exageration. No need to re-locate p/s cooling pipe either. Link to comment Share on other sites More sharing options...
Recommended Posts