Soonto_HAS_soop Posted September 12, 2006 Share Posted September 12, 2006 All parts are already removed and are sat on my garage floor. All parts plus P&P ALL PARTS OPEN TO SENSIBLE OFFERS HKS Racing Suction intake pipework for JSpec has some small scrtches and marks, can be made to fit UK, but you will have to cut some of the pipe to fit the MAF - SOLD All twin pipework, good for a polisher to have or for someone to have a go at polishing, rubber sections shown are damaged and will be removed prior to being sent - SOLD Turbo No. 2, done 82k didn't smoke, perfect if you've lost a turbo, or could be changed to a hybrid - £80 ono. http://img242.imageshack.us/img242/1272/dscn1275pk0.jpg Full Set of VSVs all seemed to be working correctly - £75 ono. http://img291.imageshack.us/img291/8642/dscn1265rs2.jpg Twin turbo heat shield, had a corner cut off for the location of an EGT probe, could be polished - £15 http://img242.imageshack.us/img242/8775/dscn1263es6.jpg No.1 Turbo, seen better days, got a crack in the wastegate valve housing, and the ceramic blades have got some damage - £40 ono http://img242.imageshack.us/img242/7581/dscn1276zw6.jpg http://img242.imageshack.us/img242/3733/dscn1250ft7.jpg Vacuum pipework above the turbos - £20 http://img291.imageshack.us/img291/9017/dscn1269cu6.jpg No.1 Oil feed and return - £5 http://img291.imageshack.us/img291/7538/dscn1267ge8.jpg Water feeds for standard twins - £15 http://img291.imageshack.us/img291/5883/dscn1270qr0.jpg Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted September 12, 2006 Author Share Posted September 12, 2006 Idle air and vacuum pipe for rear of engine - £10 http://img158.imageshack.us/img158/8049/dscn1268tv5.jpg Turbo to Turbo exhaust section - £offers http://img158.imageshack.us/img158/9797/dscn1273iz0.jpg 2-1 exhaust collector - £offers http://img242.imageshack.us/img242/1457/dscn1271eu4.jpg Exhaust valve - £offers http://img242.imageshack.us/img242/6792/dscn1272lf1.jpg Either PM or post, after 24 hours feel free to post offers for all parts not sold. Ta Ben.. Link to comment Share on other sites More sharing options...
dangerous brain Posted September 12, 2006 Share Posted September 12, 2006 Images unavailable my PC Link to comment Share on other sites More sharing options...
Sheefa Posted September 12, 2006 Share Posted September 12, 2006 Same. Link to comment Share on other sites More sharing options...
jamesmark Posted September 12, 2006 Share Posted September 12, 2006 Images not available, try imageshack.us as even putfile is rubbish for photos now Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted September 12, 2006 Author Share Posted September 12, 2006 Buggar, they were working, not working for me now either.... Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted September 12, 2006 Author Share Posted September 12, 2006 OK, seem to be working now. Link to comment Share on other sites More sharing options...
dangerous brain Posted September 12, 2006 Share Posted September 12, 2006 Yup. Wonder if the turbo's are bigger than my 1JZ ones and if they'll just bolt on Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted September 12, 2006 Author Share Posted September 12, 2006 Yup. Wonder if the turbo's are bigger than my 1JZ ones and if they'll just bolt on Not sure, but No.1 is a bit fooked TBH, would need a rebuild. Other than that, all parts to transfer over to the 1JZ Could do a deal for multiple parts.... Link to comment Share on other sites More sharing options...
Bob Posted September 12, 2006 Share Posted September 12, 2006 Ben, would you split the VSVs? I could do with the wastegate VSV on its own Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted September 12, 2006 Author Share Posted September 12, 2006 Ben, would you split the VSVs? I could do with the wastegate VSV on its own I wasn't planning on it, if they don't go in 24 hours as a set though, I'll split them no probs. If I don't PM you by the end of tomorrow then give me a nudge or something. Link to comment Share on other sites More sharing options...
suprarob Posted September 12, 2006 Share Posted September 12, 2006 you,ve got a pm Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted September 12, 2006 Author Share Posted September 12, 2006 All PM's replied to. Link to comment Share on other sites More sharing options...
supradibbs Posted September 12, 2006 Share Posted September 12, 2006 give u 15 for the vacum pipes if you can send them out tomorrow Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted September 12, 2006 Author Share Posted September 12, 2006 give u 15 for the vacum pipes if you can send them out tomorrow PM'd Link to comment Share on other sites More sharing options...
Bob Posted September 12, 2006 Share Posted September 12, 2006 I'm sorted for a VSV now thanks Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted September 13, 2006 Author Share Posted September 13, 2006 OK, All Parts Open For Sensible Offers Now People Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted September 13, 2006 Author Share Posted September 13, 2006 Standard exhaust manifold from TT, comes with hole drilled and tapped into the no. 1 runner - £offers http://img146.imageshack.us/img146/7420/dscn1274xo1.jpg Link to comment Share on other sites More sharing options...
supradibbs Posted September 13, 2006 Share Posted September 13, 2006 sorry for not getting back to you last night,i no longer require the vacum pipes thanks Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted September 13, 2006 Author Share Posted September 13, 2006 sorry for not getting back to you last night,i no longer require the vacum pipes thanks No worries, just means that I don't have to pack them today. Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted September 14, 2006 Author Share Posted September 14, 2006 If nobody wants anything else, Scambay here i come... Link to comment Share on other sites More sharing options...
Mcgoo Posted September 18, 2006 Share Posted September 18, 2006 Standard exhaust manifold from TT, comes with hole drilled and tapped into the no. 1 runner - £offers [qimg]http://img146.imageshack.us/img146/7420/dscn1274xo1.jpg[/qimg] Are all the egt bosses all the same size and thread? Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted September 18, 2006 Author Share Posted September 18, 2006 I'm not sure, I would of thought they would be, the one that was removed was an HKS one if that helps. Link to comment Share on other sites More sharing options...
dave barratt Posted September 19, 2006 Share Posted September 19, 2006 I'll take the exhaust valve if its uk type Link to comment Share on other sites More sharing options...
Recommended Posts