KaoriFan Posted August 30, 2006 Share Posted August 30, 2006 thinking on about my RHS Dash panel. i was wondering if it is possible to obtain all the a/c pushbutton's so the pictogram is illuminated as well as the LED above them. maybe i am wrong, but i seem to remember seeing this in the past. i find having the LED lit up on it's own doesn't look as nice as if you can have pushbuttons lit as well another strange request, i know, lol thanks in advance for any help Ian Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted August 30, 2006 Share Posted August 30, 2006 They should be lit already. Mine aren't but that is because the illuminated wire box has failed again. Need to sort it out again. Link to comment Share on other sites More sharing options...
Bob Posted August 30, 2006 Share Posted August 30, 2006 I've beem working on mine and have wired in small SMT led's for each button in addition to the LEDs for the lights above them - gives a perfectly uniform glow. I used white ones to start with, but should be getting round to replacing them with blue in the near future, I'll stick some pics up when i do. Link to comment Share on other sites More sharing options...
SimonB Posted August 30, 2006 Share Posted August 30, 2006 They should be lit already. Mine aren't but that is because the illuminated wire box has failed again. Need to sort it out again. Mine keeps doing that, the third one failed the other day. The usual way to illuminate them in a different colour is to use EL wire - you can thread it through all the buttons quite easily without having to worry about loads of LEDs. But yeah, as standard they should light up. Link to comment Share on other sites More sharing options...
KaoriFan Posted August 30, 2006 Author Share Posted August 30, 2006 cheers everyone for your help. looks like i need to sort that out then, from the info you have given me. i know the A/C one lights up, but none of the other buttons do, just the LEDs above.. i was thinking of going for a blue scheme as i have a silver supra. thanks, Ian Link to comment Share on other sites More sharing options...
heckler Posted August 31, 2006 Share Posted August 31, 2006 cheers everyone for your help. looks like i need to sort that out then, from the info you have given me. i know the A/C one lights up, but none of the other buttons do, just the LEDs above.. i was thinking of going for a blue scheme as i have a silver supra. thanks, Ian If your wanting to change colour, you will have to use either LED's or EL wire. Link to comment Share on other sites More sharing options...
KaoriFan Posted September 1, 2006 Author Share Posted September 1, 2006 If your wanting to change colour, you will have to use either LED's or EL wire. cheers Si, i am clueless on all things like this, so all advice is helpful. i find blue interior lights suit silver more. would like to be able to fit some blue footwell lighting (subdued), not chavvy. thanks once again Ian Link to comment Share on other sites More sharing options...
Ribenaberry Posted September 1, 2006 Share Posted September 1, 2006 I did my AC Controls the other day, as taught by Si on a cold sunday afternoon in Cardiff. All nice and blue except for the two red ones i put in. Thanks Si, its amazing what you can do with a 5 quid soldering iron. Link to comment Share on other sites More sharing options...
MKIVDreamer Posted September 1, 2006 Share Posted September 1, 2006 Snap! I have done mine all blue except rear heated windscreen and front demister buttons which are red I found the EL wire to be a PITA so I didn't use that in the end. Link to comment Share on other sites More sharing options...
Ribenaberry Posted September 1, 2006 Share Posted September 1, 2006 I can guess your reason for doing the two red ones! so that you didn't have to change all the resistors over to make all the leds the same blue colour?? I am using leds to light the backs of the switches, I just make up two LEDs with a resistor in each then solder them together and solder them direct to the PCB. with a bit of careful angling they work exactly as you would want. Unless you do what i did and accidentally solder in one red one!!! I didn't realise until the Doh moment when i plugged it into the car. Link to comment Share on other sites More sharing options...
KaoriFan Posted September 1, 2006 Author Share Posted September 1, 2006 life would be nice with a blue interior, some subdued interior lighting, thats why i want the RHS UK dash panel with the nice switches, rather than the awful looking fog light switch thats there atm. next, would like a HUD display for the Supra. i like the idea of that. hmm, HUD display, apache helicopter aiming eyepiece, guided missiles to take out BMWs on the motorway j/k Link to comment Share on other sites More sharing options...
squiffy Posted September 1, 2006 Share Posted September 1, 2006 i can recomend hecklers blue conversions! would love a HUD, are these available? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now