nige Posted August 6, 2006 Share Posted August 6, 2006 hi guys fitted my blitz sbc controller and not quite sure how to set it up properly,i have ch1 set at 0.96 boost,gain at 7,next to the boost setting it reads auto not sure if it should be set to manual? if i change it to manual mode the numbers go up by full points (ie,1,2,3,4,ets)again not sure how to set this, i was giving it some on this setting 0.96 auto and my boost peaked at 1.26,can any of you guys point me in the right direction,unfotunately i'am not a tech head so try and keep it simple if possible,lol,cheers nige. Link to comment Share on other sites More sharing options...
Guest Strych9 Posted August 7, 2006 Share Posted August 7, 2006 edit:sorry it seems was wrong,must be in manual mode for supra's.Sorry Link to comment Share on other sites More sharing options...
Dragonball Posted August 7, 2006 Share Posted August 7, 2006 call me m8 07939 111877 Link to comment Share on other sites More sharing options...
Paul Whiffin Posted August 7, 2006 Share Posted August 7, 2006 You need to run this in manual mode not auto, just keep increasing the set figure up until you reach the desired boost level, very easy to setup. Cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now