Guest EncoreWRC Posted November 17, 2006 Share Posted November 17, 2006 Yes please Dee RZ. How much and where do I send the money too?? Link to comment Share on other sites More sharing options...
Guest dee_rz Posted November 18, 2006 Share Posted November 18, 2006 need all your address's again if possible guys i have only markies as i have deleated alot of old pm's by accident which contained these, panels are all ready and will be sent out as soon as i get confirmed address's from people Link to comment Share on other sites More sharing options...
ChrisSZ Posted November 18, 2006 Share Posted November 18, 2006 PM sent. Any chance of a refund as I won't have my car any more?? Link to comment Share on other sites More sharing options...
Pedroby Posted November 23, 2006 Share Posted November 23, 2006 Hey mate, (dee_rz) Please answer my e-mails!! You still owe me some money bout the stock twins deposit. Link to comment Share on other sites More sharing options...
ChrisSZ Posted November 24, 2006 Share Posted November 24, 2006 Got my panel today :( Bent by the postman, supposed to be polished?? and scratched :( Overall, not impressed:Pling: Link to comment Share on other sites More sharing options...
Markie Posted November 25, 2006 Share Posted November 25, 2006 Sorry to say, but I had mine yesterday. Slightly bent, but not a problem, but it was blotchey, not a flush polish, loads of nicks and scratches and stinking dirty. Overall, not impressed. Link to comment Share on other sites More sharing options...
Class One Posted November 25, 2006 Share Posted November 25, 2006 Sorry to say, but I had mine yesterday. Slightly bent, but not a problem, but it was blotchey, not a flush polish, loads of nicks and scratches and stinking dirty. Overall, not impressed. Got some pics? Link to comment Share on other sites More sharing options...
ChrisSZ Posted November 25, 2006 Share Posted November 25, 2006 Got some pics? Not yet but I'll probably bung some up later on Link to comment Share on other sites More sharing options...
Guest dee_rz Posted November 25, 2006 Share Posted November 25, 2006 it fits on my but does require horn relocation, any black on the panel is only from the polish soap, just use a metal polish and it will look high polish finish and add some wd40 after to stop marks and prints sticking, it may require a bit of filing in some areas but as it's alluminium it's very easy, i'm sorry if the fit is not that great and to be honest the differing of bumpers etc from supra to supra it's hard to get a spot on fit, i'm having problems at the mo to communate with people as my p.c is dead due to a virus and i have to use a friends or familys so bare with me with replies. keep me informed with anything and keep my upto date with anything via pm's sorry guys but i want to resolve any issue which should be fairly minor. __________________ Link to comment Share on other sites More sharing options...
ChrisSZ Posted November 25, 2006 Share Posted November 25, 2006 Polished? Straight? No scratches? The piece behind it is a strip of ally I cut and polished (by hand) to go between the slam panel and the radiator. dee_rz - I waited just over three months for this, you said you would have it polished FOC - if this is polished you wanna have a serious word with your polisher dude. Sorry mate but I'm really not happy with this at all Link to comment Share on other sites More sharing options...
Paul Posted November 25, 2006 Share Posted November 25, 2006 That's shite! Ignoring the crap finish, the finish on the edges of the holes is poor. What was used to press them out? The whole job looks half finished but I really can't get over the holes, very poor IMO and not worth the money being asked for them Link to comment Share on other sites More sharing options...
SupraAyf Posted November 25, 2006 Share Posted November 25, 2006 Christ, I haven't seen work like that since my first metalwork project at school when the teacher let me loose with the tools and hammers - I was 8 at the time!!!! VERY Poor Quality IMHO /vbb/images/smilies/bbcode_shock.gif Link to comment Share on other sites More sharing options...
CJ Posted November 25, 2006 Share Posted November 25, 2006 Bugger me, that looks crap! Link to comment Share on other sites More sharing options...
supragold Posted November 25, 2006 Share Posted November 25, 2006 This really doesn't surprise me at all. I remember seeing this thread when it started and at the time had only just read another thread about dee_rz not being very good to deal with. I was looking for a panel like this back then but decided to go elsewhere and looking at that workmanship I'm sooooo glad I did. They look beyond crap I can't remember what the other thread was as it was so long ago but I remember there was a big discussion about the trader rating people can give and how it doesn't work due to people being scared of leaving bad ratings. I hope you guys that have had poor quality goods delivered use the trader rating to help advise other people on the forum from getting a poor service and poor quality goods like this. Link to comment Share on other sites More sharing options...
Gaz Walker Posted November 26, 2006 Share Posted November 26, 2006 I didn't want to do this earlier but have always done our own intercooler panels. The first incarnation was chrome and the MKII was aluminium polished, but ours are £30 and are laser cut. We only have a couple left in stock though but if theres enough demand I'll have a another batch made. One things for sure they are quite a lot better than that. Gaz. Link to comment Share on other sites More sharing options...
ChrisSZ Posted November 26, 2006 Share Posted November 26, 2006 I didn't want to do this earlier but have always done our own intercooler panels. The first incarnation was chrome and the MKII was aluminium polished, but ours are £30 and are laser cut. We only have a couple left in stock though but if theres enough demand I'll have a another batch made. One things for sure they are quite a lot better than that. Gaz. Bugger:( Too late for me now - the car's dead. If I had known earlier I could have saved myself £15 and three months:Pling: Link to comment Share on other sites More sharing options...
Class One Posted November 26, 2006 Share Posted November 26, 2006 I didn't want to do this earlier but have always done our own intercooler panels. The first incarnation was chrome and the MKII was aluminium polished, but ours are £30 and are laser cut. We only have a couple left in stock though but if theres enough demand I'll have a another batch made. One things for sure they are quite a lot better than that. Gaz. Gaz I'll have one please. Pm me details of how to pay etc thanks. Link to comment Share on other sites More sharing options...
Gaz Walker Posted November 26, 2006 Share Posted November 26, 2006 Gaz I'll have one please. Pm me details of how to pay etc thanks. Cool. I'll check how many we have left (I have a feeling its just 1 or 2) and come back to you tommorow Gaz. Link to comment Share on other sites More sharing options...
gaz1 Posted November 26, 2006 Share Posted November 26, 2006 I didn't want to do this earlier but have always done our own intercooler panels. The first incarnation was chrome and the MKII was aluminium polished, but ours are £30 and are laser cut. We only have a couple left in stock though but if theres enough demand I'll have a another batch made. One things for sure they are quite a lot better than that. Gaz. i have one of these, they are nice;) Link to comment Share on other sites More sharing options...
imi Posted November 26, 2006 Share Posted November 26, 2006 Not a good read that, quality looks crap IMO.....I hope things get sorted out. ORIGINAL ONE ADVERTISED SUPPLIED PART Link to comment Share on other sites More sharing options...
Recommended Posts