Guest dee_rz Posted August 4, 2006 Share Posted August 4, 2006 Lightweight aluminium rad/intercooler slam panels for sale will only have about 12 up for grabs and can only do this once as i've been told i'll tread on traders feet otherwise so after the first 10 i'll post on ebay in future Firstly to anyone who doesn't know what they do here it is plain and simple The aluminum plate is of very high quality it fits over the top of the front mount intercooler and radiator and diverts all incoming air through the intercooler and radiator first instead of pushing it over the top which in turn will keep dangerous engine temps down thus keeping hp up and power at a high with the safety there too. It also looks damn nice too as it's shiney (it can be polished also to make it ultra shiney) and excellent for any Supra equipped with a front mounted intercooler but will still work for people with smic too these plates are made by myself and designed by myself so do not copy had these up on the forum before and had 10 people who put there names down but cannot remember who they are i'll have around 10-12 max for sale, one is on my car now and it looks and fits perfect, i have a veilside c1, fit will vary a little from bumper to bumper but should be fine for most if not all as i factor in a good bit of lee way for fitament, i also made them so you could fit them in 1 min so no drilling needed just 3 bolts and on she goes, i will provide bolts with the panels I had these up for 49.95 delivered before and still had all 10 taken but will ask this time round for only £45 fully delivered remember that includes bolts etc, if you have any problems with fitting size etc i'll be happy to machine them down a little etc if you contact me etc unless you happy to do yourself here are the pics i'm also going to round off the front corner edges for an even better look love that last pic don't worry i haven't run it without oil lines and that tape on the compressor side for the induction lol i now have a 98 silcon pipe to go on tommorow can have 12 available have one spare right now and ready to post 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. £45 as last time i hope this is ok to do i was told if i only do it the once it would be ok Link to comment Share on other sites More sharing options...
ChrisSZ Posted August 5, 2006 Share Posted August 5, 2006 1. ChrisSZ 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Link to comment Share on other sites More sharing options...
GazzaGSi Posted August 5, 2006 Share Posted August 5, 2006 1. ChrisSZ 2. GazzaGSi 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Link to comment Share on other sites More sharing options...
Guest blueangel Posted August 5, 2006 Share Posted August 5, 2006 1. ChrisSZ 2. GazzaGSi 3.Blueangel 4. 5. 6. 7. 8. 9. 10. 11. 12. Link to comment Share on other sites More sharing options...
imi Posted August 5, 2006 Share Posted August 5, 2006 what about access to the radiator fluid reservoir?? does this really reduce temps or is this just for bling? Link to comment Share on other sites More sharing options...
Guest dee_rz Posted August 5, 2006 Share Posted August 5, 2006 it will come off in about 2 mins top it's that easy to take off, it will with no questions reduce temps all other companys who have sold panels that are similar have proven this, again it is a science there is no way that it won't reduce temps you will be shunting far more cool air to the rad and intercooler and at the same time it looks damn good, for the price it's a easy and cheap way of reducing temps a little and as people say every little help hence why i made them in the first place, because i knew i could and because i wanted one for the simply fact it's so cheap for what it does and man it looks good and cover that damn empty space that just ugly hope this helps fella Link to comment Share on other sites More sharing options...
imi Posted August 5, 2006 Share Posted August 5, 2006 OK...since I have a SMIC, I am hoping that this will drive more air into the RAD not to mention look good. what about access to the reservoir + horn, etc.. Link to comment Share on other sites More sharing options...
Guest dee_rz Posted August 5, 2006 Share Posted August 5, 2006 OK...since I have a SMIC, I am hoping that this will drive more air into the RAD not to mention look good. what about access to the reservoir + horn, etc.. Just unbolt it in 2 mins, thats the same as another design fella if you had more access it would be pointless as you wouldn't be able to stop air getting through hence the cut outs are minimal for more cool air, as i said 2 mins and you'll have access to anything you need to get to. Link to comment Share on other sites More sharing options...
mikeyb10supra Posted August 5, 2006 Share Posted August 5, 2006 are you in essex dude?? might pick one up from you Link to comment Share on other sites More sharing options...
Guest dee_rz Posted August 5, 2006 Share Posted August 5, 2006 i work in bishops stortford and would be happy to meet you, i have one right now done so i can meet you sometime next week as i'm off till tuesday, friday would be a good day Link to comment Share on other sites More sharing options...
Guest dee_rz Posted August 6, 2006 Share Posted August 6, 2006 Bump lots more left will let this run for a little while and start sending peoples out once payed remember only £45 thats fully delivered and comes with all bolts to go straight on in about 2-3 mins top Link to comment Share on other sites More sharing options...
ChrisSZ Posted August 6, 2006 Share Posted August 6, 2006 Bump lots more left will let this run for a little while and start sending peoples out once payed remember only £45 thats fully delivered and comes with all bolts to go straight on in about 2-3 mins top Any idea on when you'll be wanting payment for these dude?? Link to comment Share on other sites More sharing options...
Guest dee_rz Posted August 6, 2006 Share Posted August 6, 2006 i'll pm everyone my details for payment and just let me know when you can make me a payment and i'll send them right out to you and mark you of the list as payed Link to comment Share on other sites More sharing options...
Guest dee_rz Posted August 6, 2006 Share Posted August 6, 2006 1. ChrisSZ 2. GazzaGSi 3.Blueangel 4.mikeyb10supra -meeting me for one and will pay in person 5. 6. 7. 8. 9. 10. 11. 12. Link to comment Share on other sites More sharing options...
Guest dee_rz Posted August 7, 2006 Share Posted August 7, 2006 1. ChrisSZ 2. GazzaGSi 3.Blueangel 4.mikeyb10supra -meeting me for one and will pay in person 5. 6. 7. 8. 9. 10. 11. 12. loads more left so bump bump bump Link to comment Share on other sites More sharing options...
Dragonball Posted August 7, 2006 Share Posted August 7, 2006 Dee - you trading now? If paid up then not a problem - but if not then I'm sorry mate - but thats why we pay... Link to comment Share on other sites More sharing options...
uk-rich Posted August 7, 2006 Share Posted August 7, 2006 Link to comment Share on other sites More sharing options...
Guest dee_rz Posted August 8, 2006 Share Posted August 8, 2006 I thought we had this conversation before, infact spoke to a few traders before and was led to believe that if i made it a one off which i promised i would i'd leave it at that as i didn't want to step on traders feet, the main reason i offered 10-12 parts was because for me to make one of these for my self i have to order in a whole sheet alluminium which costs and i don't need a whole sheet for just one but with the left overs i can make a few more and offer them to members as a one off. Link to comment Share on other sites More sharing options...
imi Posted August 8, 2006 Share Posted August 8, 2006 as long as you have checked with the mods of the forum you should be fine. Link to comment Share on other sites More sharing options...
Lucifer Posted August 8, 2006 Share Posted August 8, 2006 Also Dee, you may need to round those corners as it makes the product look much nicer. Link to comment Share on other sites More sharing options...
Guest dee_rz Posted August 8, 2006 Share Posted August 8, 2006 Cheers martin thats exactly what i said to my friend the other day will radias them off when i get back to work i have some friends with skylines now interested in me making some for them too which is nice Link to comment Share on other sites More sharing options...
Lucifer Posted August 8, 2006 Share Posted August 8, 2006 Cheers martin thats exactly what i said to my friend the other day will radias them off when i get back to work i have some friends with skylines now interested in me making some for them too which is nice Thats what I meant .. yeah Radius... Link to comment Share on other sites More sharing options...
michael Posted August 8, 2006 Share Posted August 8, 2006 Have you tried fitting one of these with the bumper and rubber strip in place yet? Link to comment Share on other sites More sharing options...
Guest dee_rz Posted August 8, 2006 Share Posted August 8, 2006 Thats what I meant .. yeah Radius... lol your term was more simple Link to comment Share on other sites More sharing options...
Guest dee_rz Posted August 9, 2006 Share Posted August 9, 2006 Lightweight aluminium rad/intercooler slam panels for sale will only have about 12 up for grabs and can only do this once as i've been told i'll tread on traders feet otherwise so after the first 10 i'll post on ebay in future Firstly to anyone who doesn't know what they do here it is plain and simple The aluminum plate is of very high quality it fits over the top of the front mount intercooler and radiator and diverts all incoming air through the intercooler and radiator first instead of pushing it over the top which in turn will keep dangerous engine temps down thus keeping hp up and power at a high with the safety there too. It also looks damn nice too as it's shiney (it can be polished also to make it ultra shiney) and excellent for any Supra equipped with a front mounted intercooler but will still work for people with smic too these plates are made by myself and designed by myself so do not copy had these up on the forum before and had 10 people who put there names down but cannot remember who they are i'll have around 10-12 max for sale, one is on my car now and it looks and fits perfect, i have a veilside c1, fit will vary a little from bumper to bumper but should be fine for most if not all as i factor in a good bit of lee way for fitament, i also made them so you could fit them in 1 min so no drilling needed just 3 bolts and on she goes, i will provide bolts with the panels I had these up for 49.95 delivered before and still had all 10 taken but will ask this time round for only £45 fully delivered remember that includes bolts etc, if you have any problems with fitting size etc i'll be happy to machine them down a little etc if you contact me etc unless you happy to do yourself here are the pics i'm also going to round off the front corner edges for an even better look [qimg]http://i23.photobucket.com/albums/b396/dee_rz/PICT0011.jpg[/qimg] [qimg]http://i23.photobucket.com/albums/b396/dee_rz/PICT0012.jpg[/qimg] [qimg]http://i23.photobucket.com/albums/b396/dee_rz/PICT0014.jpg[/qimg] [qimg]http://i23.photobucket.com/albums/b396/dee_rz/PICT0018.jpg[/qimg] [qimg]http://i23.photobucket.com/albums/b396/dee_rz/PICT0028.jpg[/qimg] love that last pic don't worry i haven't run it without oil lines and that tape on the compressor side for the induction lol i now have a 98 silcon pipe to go on tommorow can have 12 available have one spare right now and ready to post 1. ChrisSZ 2. GazzaGSi 3.Blueangel 4.mikeyb10supra -meeting me for one and will pay in person 5. 6. 7. 8. 9. 10. 11. 12. £45 as last time i hope this is ok to do i was told if i only do it the once it would be ok still got lots left bump Link to comment Share on other sites More sharing options...
Recommended Posts