Sheefa Posted July 27, 2006 Share Posted July 27, 2006 Hi again all, As mentioned, only just got my Supra. It's a K reg J-spec Auto TT in Black with the following mods: REPLACEMENT ENGINE WITH ONLY 42,000KM COVERED STAGE 3 HYBRID TURBOS LESS THAN 1000MILES BRAND NEW FRONT MOUNTED INTERCOOLER WITH HARD PIPES NOT SHOWN IN PICS 550 INJECTORS JUST BEEN CLEANED AND FLOW TESTED WITH APEXI SAFC2 FUEL COMPUTER FULLY DECATED WITH HKS SUPER DRAGER EXHAUST BLITZ INDUCTION KIT WITH POLISHED HEAT SHIELD BLITZ SBC-ID BOOST CONTROLLER FULL BILSTEIN SUSPENSION WITH EIBACH SPRINGS Any ideas on the performance figures, 0-60, top speed and BHP output? I know the guy I bought it off put it on the dyno and got 420BHP at the fly - WITHOUT the new turbos. Here's hoping you can enlighten me! Cheers. Link to comment Share on other sites More sharing options...
letmeshowyou Posted July 27, 2006 Share Posted July 27, 2006 what sort of boost is it running now? Link to comment Share on other sites More sharing options...
tbourner Posted July 27, 2006 Share Posted July 27, 2006 Boost is the figure we need. If they really are hybrids then it could be 450-500BHP. Link to comment Share on other sites More sharing options...
Sheefa Posted July 27, 2006 Author Share Posted July 27, 2006 Only running a modest 0.7 at moment. Not going to push it further for a while until i'm used to it. What's a 'safe' boost increase? Link to comment Share on other sites More sharing options...
hob Posted July 27, 2006 Share Posted July 27, 2006 What's a 'safe' boost increase? boost and safe never go together Link to comment Share on other sites More sharing options...
Sheefa Posted July 27, 2006 Author Share Posted July 27, 2006 True I suppose, but hey, it's still minimal and i've got the cooling to take the heat.........I hope! Link to comment Share on other sites More sharing options...
tbourner Posted July 27, 2006 Share Posted July 27, 2006 1.2 bar is OK (we think ), but if they're proper hybrids I believe you can get 1.4 out of them. 0.7 bar won't get you much above stock BHP I don't think. Link to comment Share on other sites More sharing options...
jayssupra Posted July 27, 2006 Share Posted July 27, 2006 0.7 bar you must still have the cats in the exhaust, if you remove both cats boost should rise to about 1.1 - 1.3 bar, your not bpu until you remove the cats . Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now