Tattooman Posted July 16, 2006 Share Posted July 16, 2006 I am also confused as it looks like I have two rads installed.....is one the power steering cooler and does it need removing as well?? Hmmmm sorry for the The other one will be the Air Con Rad fella:D Link to comment Share on other sites More sharing options...
paul mac Posted July 16, 2006 Share Posted July 16, 2006 Gaz off to the scrap yard for the expansion bottle this came off a Rover (i think) and cost a quid, any old bottle will do plus you get to smash things up when no ones lookin its great Link to comment Share on other sites More sharing options...
paul mac Posted July 16, 2006 Share Posted July 16, 2006 sorry gaz just seen you allready have a bottle, slacken the battery off and move it as far away from the wing as it will go there is quite a bit of slack and slot in the expansion tank as per pic Link to comment Share on other sites More sharing options...
mikeyb10supra Posted July 16, 2006 Share Posted July 16, 2006 The other one will be the Air Con Rad fella:D I take it this remains where it is then....what about the tube thing attached to it......see first pic in the thread (just to the left of the bonnet release in the pic) Link to comment Share on other sites More sharing options...
paul mac Posted July 16, 2006 Share Posted July 16, 2006 you really dont want to start messing with the air con (if you want to keep it) i have a big custom I/C and the air con is no problem it really isn't in the way Link to comment Share on other sites More sharing options...
garetheves Posted July 16, 2006 Author Share Posted July 16, 2006 Gaz off to the scrap yard for the expansion bottle this came off a Rover (i think) and cost a quid, any old bottle will do plus you get to smash things up when no ones lookin its great Cheers Paul, i had a go before at trying to fit in by the battery but didnt have much time so ill have another go this week. Might just do what you said and get a smaller one from a scrapie. Cheers Link to comment Share on other sites More sharing options...
paul mac Posted July 17, 2006 Share Posted July 17, 2006 mikey pic as requested Link to comment Share on other sites More sharing options...
Tattooman Posted July 17, 2006 Share Posted July 17, 2006 I take it this remains where it is then....what about the tube thing attached to it......see first pic in the thread (just to the left of the bonnet release in the pic) I would work around it fella , unless you wanna do away with the Air Con and free up another 10-15BHP ??? It's up to you but you would get the same gains if you bought a Lightened Underdrive pulley Kit..... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now