Pete Posted July 7, 2006 Share Posted July 7, 2006 I've just come to install my gauge after waiting for months for other bits and now I've lost the freakin' manual and I can't see a download on AEMs site! Anyone got it in digital form? Ta! Quote Link to comment Share on other sites More sharing options...
LeeT Posted July 7, 2006 Share Posted July 7, 2006 i needed the same thing a while back when i needed to connect the aem up to my mapecu. i cant find the original thread but it was Migster who posted up the instructions so may be worth a pm to him Quote Link to comment Share on other sites More sharing options...
Jake Posted July 7, 2006 Share Posted July 7, 2006 Do you need one? I never even looked at mine. I could stick my one in the post if you want it but there's really nothing of use in it. Quote Link to comment Share on other sites More sharing options...
LeeT Posted July 7, 2006 Share Posted July 7, 2006 Do you need one? I never even looked at mine. I could stick my one in the post if you want it but there's really nothing of use in it. its handy to know which wires go where:) Quote Link to comment Share on other sites More sharing options...
Jake Posted July 7, 2006 Share Posted July 7, 2006 i needed the same thing a while back when i needed to connect the aem up to my mapecu. i cant find the original thread but it was Migster who posted up the instructions so may be worth a pm to himThe white wire from the gauge is the 0-5volt output. Blue wire is serial, red and black are obvious. Quote Link to comment Share on other sites More sharing options...
LeeT Posted July 7, 2006 Share Posted July 7, 2006 The white wire from the gauge is the 0-5volt output. Blue wire is serial, red and black are obvious. YEP, That should be all he needs to know:cool: Quote Link to comment Share on other sites More sharing options...
Jake Posted July 7, 2006 Share Posted July 7, 2006 Here you go Pete10-4000_for_UEGO_Gauges_30-4XXX.pdf Quote Link to comment Share on other sites More sharing options...
Pete Posted July 7, 2006 Author Share Posted July 7, 2006 Thanks guys! (Cheers for the generous offer of yours and the PDF Jake, I won't loose that) I've wired up the red to ignition and earthed it - works great, well, it counts up and checks the LEDs. I just need to get the sensor connected now. I've been busy and managed to install my Envy A pillar double gauge pod (superb quality), relocate the Blitz mirror drive boost gauge to it and wire up the the UEGO to it also. Installed the DIN pocket recently acquired from SonicSoop in the empty hole that's been there for ages and properly mounted the RaceLogic switch on the dash. Productive evening for a change Quote Link to comment Share on other sites More sharing options...
Jake Posted July 7, 2006 Share Posted July 7, 2006 Don't lose it either! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.