Paul Posted October 27, 2001 Share Posted October 27, 2001 Just been out and noticed that the switches for the air con and a couple of the blower direction ones aren't lit. There are about six I think, and the three on the left are out, does one bulb service all three switches? I am not on about the LED's above, but the actual 'backlight' to these. I suppose it's a case of removing the dash, I'll have to look at the instructions someone left a while back. Cheers, Paul Link to comment Share on other sites More sharing options...
chrisrocks Posted October 27, 2001 Share Posted October 27, 2001 hi paul, as luck would have it I have that unit out of my car and sitting on my desk in front of me. 3 bulbs for the aircon/direction back lights. it`s pretty easy to get the unit out of the car, any probs just give me a shout. hth Cheers C. Link to comment Share on other sites More sharing options...
Paul Posted October 27, 2001 Author Share Posted October 27, 2001 So maybe a couple of bulbs are shot? Take off 'facia panel' to get to them? Paul Link to comment Share on other sites More sharing options...
chrisrocks Posted October 27, 2001 Share Posted October 27, 2001 you`ll need to take out the gear box trim ( manual car ) then the odo surround then the dials surround you should then be able to get the facia panel out ( helps if you remove the various connectors at the back ) and there are about 3/4 screws holding the unit if place. pop the casing open and you should find the bulbs in there.... cheers Chris Link to comment Share on other sites More sharing options...
Paul Posted October 27, 2001 Author Share Posted October 27, 2001 Cheers Chris, I'll give it a go, just wanted to make sure what's involved before stripping the whole interior out :biggrin: Paul Link to comment Share on other sites More sharing options...
chrisrocks Posted October 27, 2001 Share Posted October 27, 2001 no worries....just take your time... the orange connector plugs on the back of the unit can be a right PITA to get off thought.... also just watch the various dash parts don`t scratch against each other... cheers chris Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now