FaithStalker Posted April 8, 2002 Share Posted April 8, 2002 after months of trying to do it, i finally got round to fixing the drivers side side-light bulb. HALFORDs own bulbs - you get 2 in a pack, 1 fitted, the other didnt!!! still i dont care about that....the problem i discovered is if you put you fingers under the whole headlight where it meets the bumper, you can lift it up by 1 cm ! checked the other light - it doesnt budge. tried to look around on the inside but i cant seem to see any missing bolts, from the back. (difficult with the air box!) I am wondering if i need to get underneath the light, come from the bottom (so to speak!) any ideas? Link to comment Share on other sites More sharing options...
Digsy Posted April 8, 2002 Share Posted April 8, 2002 Hi Tony. I took one of my headlights out last week. It was held in by 1x bolt (on the inside edge visible from the top of the car, and 2x nuts, accessible from the rear without removing anything. There were also two locating cones, one on each side. I *think* I had all the necessary fixings, and (to quote Ashford & Simpson mine is "solid, solid as a rock". Link to comment Share on other sites More sharing options...
FaithStalker Posted April 8, 2002 Author Share Posted April 8, 2002 i'll take another look tonight and see if i get home b4 dark ! probably just need to tighten me nuts to stop it wiggling around in its slot ! thanks D. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now