Vaughany Posted January 24, 2004 Share Posted January 24, 2004 I have just bought a set of Pro Kit Eibach springs for my Soop. I'm sure it will become apparent when I take the old springs off but the springs are not labelled etc so I am unsure which springs are for the front or rear. I am sure the mate I have asked to fit them will know as he is more clued up on motors than I am. So just out of interest for the members who are running these springs or for just the people who know. Which springs are for the front and which springs are for the rear. The springs are different lenghts and one set are more compacted at one end. Help appreciated as I dont want to mess this up, I spoke to Eibach, they told me they would be marked up HA or VA with HA being for the rear of the car. Unfortunately when I got them ther was no HA or VA on them. On the springs it had 8222.001 and 77312 on one pair and 8222.002, 97808 on the other pair. cheers for the help if anyone knows Quote Link to comment Share on other sites More sharing options...
Timwildman Posted January 24, 2004 Share Posted January 24, 2004 Does this picture help, they do look the same on the picture Grr didn't work oh well. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 24, 2004 Share Posted January 24, 2004 The pair with the smaller diameter "tail" at one end are the rears. The fronts are a heavier gauge wire, too. Quote Link to comment Share on other sites More sharing options...
Vaughany Posted January 24, 2004 Author Share Posted January 24, 2004 Chris Thanks alot, you have saved alot of hassel and phone calls to Eibach. Cheers again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.