Dave Posted June 17, 2006 Share Posted June 17, 2006 just got a new oem gear shift and cant work out how to get the o/d button off without cutting the two wires and the selector button is proving hard to get out dont wanna break anything. done a search but not much help .anyone done one before?????? Link to comment Share on other sites More sharing options...
DaveMassie Posted June 18, 2006 Share Posted June 18, 2006 I just snipped the wires and then reconnected them after putting them through the new stick, couldnt see any other way round it... Link to comment Share on other sites More sharing options...
Dave Posted June 18, 2006 Author Share Posted June 18, 2006 yep been out there for 2hours dismantled the gear stick assembly and cant see any other way round it than snipping the wires .Where did you snip them and what did you use to reconnect them .?:???? Link to comment Share on other sites More sharing options...
keron Posted June 18, 2006 Share Posted June 18, 2006 there is a way as i did mine...if you follow the wires down near the gearbox tunnel? there is a clip there...then you just unclip it and pull it through. Link to comment Share on other sites More sharing options...
Dave Posted June 19, 2006 Author Share Posted June 19, 2006 there is a way as i did mine...if you follow the wires down near the gearbox tunnel? there is a clip there...then you just unclip it and pull it through. yeah saw that clip but didnt think it would go through the nob and couldnt get my hand in there to pull it out thanks for the help guys Link to comment Share on other sites More sharing options...
DaveMassie Posted June 20, 2006 Share Posted June 20, 2006 I snipped them at the top of the wires, (nearerst to the button) presumed there would be less movement at that end to help not cause any stress on the joins, i used those cheapy clips which worked perfectly but ended up soldering them just to be a fussy git! Link to comment Share on other sites More sharing options...
Guest GeordieBoyKel Posted June 20, 2006 Share Posted June 20, 2006 Where did you get the Gear Shift from? Mine is soooooooo worn! Link to comment Share on other sites More sharing options...
Need4Speed Posted June 21, 2006 Share Posted June 21, 2006 Always think "how was this built?" (because it was) and the solution usually follows. Link to comment Share on other sites More sharing options...
Dave Posted June 21, 2006 Author Share Posted June 21, 2006 paid 25 quid from nic but there the same price a toyota dealers Link to comment Share on other sites More sharing options...
Dave Posted June 21, 2006 Author Share Posted June 21, 2006 Always think "how was this built?" (because it was) and the solution usually follows. work out how it was put together easy take it apart another matter:rolleyes: anyway i snipped the wires and rejoined em job done looks nice now Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now