Urgent help needed!

[RedM]

Out in the car today and the engine died on me for about 20-30 secs. SHe started up again and I pulled into nearest parking area.

 

Battery terminal had come loose. Pushed it on and after a few attempts she started up.

 

Now for the problem. I have RLTC and on all settings except OFF she now mis-fires like nothing I've ever known. She won't rev past 2500 rpm.

 

I've checked the settings and all are okay. She revs fine in the RL off position though.

 

Any ideas on causes? Could it be something not related to RLTC?

[steve single]

It`s gotta be the rltc if the car works fine with it off. Put the loom back to standard mate, then revert back to the rltc mode mate. Ill give you a hand today if you like. Lemme know.

[RedM]

Trying to do all that now but it's p*ssing down.

[b_have]

Sounds like launch control is activated.

[jamesmark]

all this hype about RLTC and so far it sounds like its been nothing but a sorehead mate, not having much luck so far, hope you get it sorted martin

[RedM]

Sounds like launch control is activated.

 

Don't have launch control.

[RedM]

all this hype about RLTC and so far it sounds like its been nothing but a sorehead mate, not having much luck so far, hope you get it sorted martin

 

When it works it works amazingly well. However, there are some issues that I'm going take straight to Racelogic . When I have their verdict I may be able to get it sorted.

[steve single]

Can`t think why a power loss will make it loose it`s marbles mate. Its like saying when you turn your pc off you will need to re load all data for it to work:rolleyes:

 

It`s obviously had a word with it`s self and thrown a wobbler. Can`t understand why when we uploaded the de-fault setting it was cured itsself. But wont work on the old program what you was using for a month:Pling: bizzzzzzarrrrrrrreeee:sly:

[RedM]

Yeah, you would think that anything uploaded to it would either work or not.