danwhite Posted May 18, 2006 Share Posted May 18, 2006 Right after changing the rear brakes i have discovered that the squeek i get sometimes isnt the rear brakes althought they dont make as much noise now !. But after reading about the rear bearings and talkin to a friend of mine im almost certain it is these that are making the noise. My question to all is how hard is this to do on your drive ?,i feel quiet confident following instructions etc when it comes to these things but i dont wont to bite off more than i can chew !. Any ideas on the subject would be great i just want to know what im getting my self into ?. Regards Dan Quote Link to comment Share on other sites More sharing options...
Bob Posted May 18, 2006 Share Posted May 18, 2006 Not easy mate. There's a brief guide on mkiv.com, but either way you'll need a 10 or 20t press to remove and reinstall the bearings. Quote Link to comment Share on other sites More sharing options...
danwhite Posted May 18, 2006 Author Share Posted May 18, 2006 Pm'd You Quote Link to comment Share on other sites More sharing options...
Ben-san Posted May 18, 2006 Share Posted May 18, 2006 Dan, Most good garages will quote an honest 3 ish hours labour to do this in a proper workshop. It has been discussed before and the general concensus is that you should not attempt this yourself without a big press and the right tools. B Quote Link to comment Share on other sites More sharing options...
danwhite Posted May 18, 2006 Author Share Posted May 18, 2006 yea gonna have to be a garage job chap , just wanted to know how hard it was Bob has sent me a link and it looks hard !.Its a tad over my head ! Regards Dan Quote Link to comment Share on other sites More sharing options...
danwhite Posted May 18, 2006 Author Share Posted May 18, 2006 Ok i have the bits winging their way to me ! (thanks Bob ) but what can i expect labour wise from a non toyota garage?. Dan Quote Link to comment Share on other sites More sharing options...
danwhite Posted May 18, 2006 Author Share Posted May 18, 2006 price rate i mean ?. Quote Link to comment Share on other sites More sharing options...
Steve Posted May 18, 2006 Share Posted May 18, 2006 I did both of mine in my bosses garage at his house and it took us all day (9.30am - 18.00) to change them. Its not a job i would want to be doing again. Quote Link to comment Share on other sites More sharing options...
RobSheffield Posted May 18, 2006 Share Posted May 18, 2006 i removed my hub myself and that was a good 4 nights work in its self, even with a decent copy of the manual i then took the removed hub to Toyota who managed to fit the new bearing wrong (i dont know how) and when i refitted it the whole hub/driveshaft assembly was loose. so i took it back, they had another go, all happy, all done Quote Link to comment Share on other sites More sharing options...
danwhite Posted May 18, 2006 Author Share Posted May 18, 2006 Thanks guys from what ive seen does not look easy ?. Illl let you know how i get on ?. Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.