INDYPWR Posted April 24, 2006 Share Posted April 24, 2006 hey mates! i am boosting 1.1 bar (is that about 15psi?) and i wanted to know how many horespower my car is putting out on the wheels? running: dual decatt, restrictor ring, fcd, colder plugs, fmic, walbro pump... tks Link to comment Share on other sites More sharing options...
Lucifer Posted April 25, 2006 Share Posted April 25, 2006 Hello, Cant really tell you an exact number obviously, but between 370 and 400 I would Guestimate if setup properly Link to comment Share on other sites More sharing options...
Jake Posted April 25, 2006 Share Posted April 25, 2006 between 370 and 400 I would GuestimateHe wants @the wheels not @The Red Lion! Link to comment Share on other sites More sharing options...
INDYPWR Posted April 25, 2006 Author Share Posted April 25, 2006 yeah, i just wanted to know the estimate with my set up... chris w. gave me restrictor ring of 1.bar i believe but with my greddy bc, i can boost 1.1 bar anytime, anyday....! i recently installed the blitz power meter ID and i dialed 329bhp with speed of 65mph and barely hit third gear and stopped. i was doing the test run around my house....hehhee...not on highway but i will try it soon. the car is running great as far as i know. Link to comment Share on other sites More sharing options...
Lucifer Posted April 25, 2006 Share Posted April 25, 2006 Oh in that case, sorry. Jake always follows me round pointing out my mis readings Link to comment Share on other sites More sharing options...
Homer Posted April 25, 2006 Share Posted April 25, 2006 Jap spec or UK spec? I'd agree with Lucifer with those mods for a jap spec, 370-400bhp at the fly is realistic (that would be 280-330 at the wheels for an auto). What front spoiler is fitted and is the fmic ducted? Could add some more hp in a dyno scenario. Any idea of the AFR's while on full boost/high rpm? 12.5 at high boost & rpm should see 350+bhp at the wheels in a manual, thats maybe 330 for an auto. If you want to see much more visit Thor for a hub dyno, or you local rolling road an ask them for a sympathetic reading Link to comment Share on other sites More sharing options...
INDYPWR Posted April 25, 2006 Author Share Posted April 25, 2006 Jap spec or UK spec? I'd agree with Lucifer with those mods for a jap spec, 370-400bhp at the fly is realistic (that would be 280-330 at the wheels for an auto). What front spoiler is fitted and is the fmic ducted? Could add some more hp in a dyno scenario. Any idea of the AFR's while on full boost/high rpm? 12.5 at high boost & rpm should see 350+bhp at the wheels in a manual, thats maybe 330 for an auto. If you want to see much more visit Thor for a hub dyno, or you local rolling road an ask them for a sympathetic reading this is on jspec with full bpu...5spd, not auto. Link to comment Share on other sites More sharing options...
s crane Posted April 25, 2006 Share Posted April 25, 2006 5 speed manual turbo,is that right, Link to comment Share on other sites More sharing options...
INDYPWR Posted April 25, 2006 Author Share Posted April 25, 2006 5 speed manual turbo,is that right, yes, i put jspec on my soarer....but used stock 5psd tranny with upgrade clutch kit. hey, how do i posts pics in here? i tried a few time but no luck... where do i go? i've been wanting to show you guys my set up.... Link to comment Share on other sites More sharing options...
Tom Posted April 25, 2006 Share Posted April 25, 2006 you could upload and link from http://www.photobucket.com, it's really good or when you reply go to manage attachments and make sure they are smaller than the size limit. Link to comment Share on other sites More sharing options...
Scooter Posted April 25, 2006 Share Posted April 25, 2006 i've been wanting to show you guys my set up.... please do, would be interesting, especially the mods to fit the 5 speed box to the Aristo engine............ Link to comment Share on other sites More sharing options...
INDYPWR Posted April 28, 2006 Author Share Posted April 28, 2006 guys, i posted pics on the gallery forum....check them out! Link to comment Share on other sites More sharing options...
Nic Posted April 28, 2006 Share Posted April 28, 2006 Nice motor As you're in the US, your hp figure will be a little higher, as you use a different HP unit of measurement there. Not sure what the conversion calculation is between the 2 different hp values is though. Link to comment Share on other sites More sharing options...
Jake Posted April 28, 2006 Share Posted April 28, 2006 As you're in the US, your hp figure will be a little higher, as your dynos run downhill, like your dragstrips Link to comment Share on other sites More sharing options...
Nic Posted April 28, 2006 Share Posted April 28, 2006 did I say that out loud Link to comment Share on other sites More sharing options...
carl0s Posted April 28, 2006 Share Posted April 28, 2006 Nice motor As you're in the US, your hp figure will be a little higher, as you use a different HP unit of measurement there. Not sure what the conversion calculation is between the 2 different hp values is though. from the great wikipedia.. The most-common definition of horsepower for engines is the one originally proposed by James Watt in 1782. Under this system, one horsepower is defined as: 1 hp = 33,000 ft·lbf·min−1 = exactly 745.69987158227022 W Metric horsepower, as a rule, is defined as 735.49875 W, or roughly 98.6% of mechanical horsepower. This was a minor issue in the days when measurement systems varied widely and engines produced less power, but has become a major sticking point today. Exotic cars from Europe like the McLaren F1 and Bugatti Veyron are often quoted using the wrong definition, and their power output is sometimes even converted twice due to confusion over whether the original "horsepower" number was metric or mechanical. Link to comment Share on other sites More sharing options...
lambertpig Posted April 28, 2006 Share Posted April 28, 2006 from the great wikipedia.. The most-common definition of horsepower for engines is the one originally proposed by James Watt in 1782. Under this system, one horsepower is defined as: 1 hp = 33,000 ft·lbf·min−1 = exactly 745.69987158227022 W Metric horsepower, as a rule, is defined as 735.49875 W, or roughly 98.6% of mechanical horsepower. This was a minor issue in the days when measurement systems varied widely and engines produced less power, but has become a major sticking point today. Exotic cars from Europe like the McLaren F1 and Bugatti Veyron are often quoted using the wrong definition, and their power output is sometimes even converted twice due to confusion over whether the original "horsepower" number was metric or mechanical. you mean the veyron only has 993bhp! right thats it i am cancelling my order ,bloody cheats!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now