danwhite Posted April 24, 2006 Share Posted April 24, 2006 Hi everybody I have smacked my rays alloys and sent the rear passenger side wheel on the wonk!.Meaning its pointing in to the car ? the other side is straight thoe ?. I have had the tracking done today but they were just a basic garage in my town and only knew how to adjust the front wheels on theit laser tracking system. I have now booked it in with toyota st ives on the 15th of may. Any advice would be great . Dan Quote Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted April 24, 2006 Share Posted April 24, 2006 You mean the front is pushed in compared to the rear, or that the top is pushed in compared to the bottom? Quote Link to comment Share on other sites More sharing options...
danwhite Posted April 24, 2006 Author Share Posted April 24, 2006 Nether mate the rear right wheel seems to be in slightly ?, toe in if that is the right word?. I was just asking if the rear wheels on the supra can be adjusted like the front ones. Quote Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted April 24, 2006 Share Posted April 24, 2006 They can be adjusted, but depends on how hard you hit whatever you did. Could of bent something quite easily. Quote Link to comment Share on other sites More sharing options...
danwhite Posted April 24, 2006 Author Share Posted April 24, 2006 all looks fine mate has been looked at twice on ramps no bars look bent to me but im no expert . Toyota on the 15th looks the only way plus now aux belt squeeks ! lol Dan Quote Link to comment Share on other sites More sharing options...
jamesmark Posted April 24, 2006 Share Posted April 24, 2006 sounds like what i have, the rear drivers side is in appx 1 inch more than the passenger side, and it is requiring getting jigged Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 25, 2006 Share Posted April 25, 2006 Somethings bent, the adjusters won't move in an impact, something will bend. It needs a strip down on that side and the relevant bits measuring and a lot, to be safe, changing. Quote Link to comment Share on other sites More sharing options...
danwhite Posted April 26, 2006 Author Share Posted April 26, 2006 so are toyota the best to take it too then ?, i cant do much till i get back from the states but any ideas on what to do would be great guys . Not really had this one on any car ive had before . Regards Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.